XW2Z-200J-B1 Omron, XW2Z-200J-B1 Datasheet - Page 102

• Manufacturer Part Number: XW2Z-200J-B1
• Description: CONNECTOR CABLE 2M
• Manufacturer: Omron

Specifications of XW2Z-200J-B1

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: XW2Z200JB1

External Dimensions
Wiring Screw-less
Clamp Terminal
Blocks
Wiring Method
Wiring Servo Relay Units
41.7
100 90
15.9
Signal switches
Screw-less clamp terminal blocks use clamps to attach wires, and do not
require screws. In addition to control signal wiring to Servo Drivers, clamp ter-
minal blocks can be used to connect sensors and external devices. A ferrule,
however, must be connected to the sensor or external device cable when con-
necting to clamp terminal blocks.
The following table shows the suitable ferrules.
The following screwdriver can be used when removing wires.
Nihon Weidmuller Co. Ltd. H 0.5/16 D
Phoenix Contact Inc.
• Inserting Wires
• Removing Wires
Insert the ferrule into the terminal hole.
Push and hold the release button on top of the terminal hole with a small
flat-blade screwdriver and remove the wire.
160
Manufacturer
Release button
Terminating resistance switch
Small minus screwdriver
Phase B switches
4.5 dia.
AI-0.5-10
AI-0.75-10
AI-1.5-10
H 0.75/16 D
H 1.5/16 D
30.7
Model
0.5 mm
0.75 mm
1.25 mm
0.5 mm
0.75 mm
1.25 mm
Applicable wire
2
2
2
2
2
2
(20AWG)
(20AWG)
(18AWG)
(16AWG)
(18AWG)
(16AWG)
Section 3-4
79