XW2Z-200J-B1 Omron, XW2Z-200J-B1 Datasheet - Page 374

• Manufacturer Part Number: XW2Z-200J-B1
• Description: CONNECTOR CABLE 2M
• Manufacturer: Omron

Specifications of XW2Z-200J-B1

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: XW2Z200JB1

Auxiliary Area Allocations
Address
A414
A415
A500
A502
A507
A508
A509
A510 to
A514
A515 to
A519
02
03
04
05
08
09
10
11
15
00 to 15 RS-422A Port Reception Counter (no-protocol
14
00
01
02
00 to 15 Data Trace Period
09
11
12
13
14
15
15
00 to 15 Macro Area Input Words
00 to 15 Macro Area Output Words
Bits
RS-422A
Port
Error
Flags
RS-422A Port Communications Error Flag
RS-422A Port Send Ready Flag (no-protocol
mode)
RS-422A Port Reception Completed Flag (no-
protocol mode)
RS-422A Port Reception Overflow Flag (no-pro-
tocol mode)
RS-422A Port Settings Changing Flag
mode)
Error Log Pointer Reset and Memory Not Held
Flag OFF Bit
RS-232C Port Restart Bit
Peripheral Port Restart Bit
RS-422A Port Restart Bit
Differentiate Monitor Completed Flag
Trace Trigger Monitor Flag
Trace Completed Flag
Trace Busy Flag
Trace Start Bit
Sampling Start Bit
Constant Cycle Time Exceeded Error Clear Bit
Parity Error Flag
Framing Error Flag
Overrun Error Flag
Timeout Error Flag
Name
These error flags turn ON when an error has occurred at the RS-
422A port.
Turns ON when a communications error has occurred at the RS-
422A port.
Turns ON when the RS-422A port is ready to send data in no-pro-
tocol mode.
Turns ON when the RS-422A port has completed the reception in
no-protocol mode.
Turns ON when a data overflow occurred during reception
through the RS-422A port in no-protocol mode.
Turns ON while the RS-422A port’s communications settings are
being changed.
Indicates (in binary) the number of bytes of data received when
the RS-422A port is in no-protocol mode.
The error log pointer in A408 is reset to 0000 hex and Memory
Not Held Flag (A404.14) is turned OFF when this bit is turned
ON.
Turn this bit ON to restart the RS-232C port.
This bit is turned OFF automatically when the restart processing
is completed.
Turn this bit ON to restart the peripheral port.
This bit is turned OFF automatically when the restart processing
is completed.
Turn this bit ON to restart the RS-422A port.
This bit is turned OFF automatically when the restart processing
is completed.
Data will be traced using the period specified here when tracing
each cycle is specified from the CX-Programmer.
0000 hex: Each cycle
0001 to 000F hex: Every 2 to 16 cycles
Turns ON when the differentiate monitor condition has been
established during execution of differentiation monitoring.
(This flag will be turned OFF when differentiation monitoring
starts.)
Turns ON when a trigger condition is established by the Trace
Start Bit (A508.14). OFF when the next Data Trace is started by
the Sampling Start bit (A508.15).
Turns ON when sampling of a region of trace memory has been
completed during execution of a Trace.
Turns OFF when the next time the Sampling Start Bit (A508.15) is
turned from OFF to ON.
Turns ON when the Sampling Start Bit (A508.15) is turned from
OFF to ON. Turns OFF when the trace is completed.
Turn this bit ON to establish the trigger condition. The offset indi-
cated by the delay value (positive or negative) determines which
data samples are valid.
When a data trace is started by turning this bit from OFF to ON
from the CX-Programmer, the FQM1 will begin storing data in
Trace Memory by one of the three following methods:
1) Data is sampled at regular intervals (10 to 2,550 ms).
2) Data is sampled when TRSM(045) is executed in the program.
3) Data is sampled at the end of every cycle.
The operation of A508.15 can be controlled only from the CX-Pro-
grammer.
Used to enable the constant cycle time function again after the
constant cycle time has been exceeded.
Before the subroutine specified in MCRO(099) is executed, the
contents of the five words specified in the operand to be passed
to the subroutine are stored here.
After the subroutine specified in MCRO(099) has been executed,
the results of the subroutine are transferred to these five words.
Function
Appendix D
351