ia186em Innovasic Semiconductor Inc., ia186em Datasheet - Page 143

no-image

ia186em

Manufacturer Part Number
ia186em
Description
8-bit/16-bit Microcontrollers
Manufacturer
Innovasic Semiconductor Inc.
Datasheet

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
ia186em-PQF100I-R-03
Manufacturer:
INNOVASIC
Quantity:
3 590
Part Number:
ia186em-PQF100I-R-03
Manufacturer:
Innovasic Semiconductor
Quantity:
10 000
Part Number:
ia186em-PTQ100I-R-03
Manufacturer:
Innovasic Semiconductor
Quantity:
10 000
IA186EM/IA188EM
8-Bit/16-Bit Microcontrollers
end of the timer interrupt routine being serviced, set the Interrupt Enable Bit in the Process
Status Word to globally disable interrupts prior to clearing the timer interrupt being serviced and
unmask the appropriate timer interrupts.
Errata No. 2
Problem:
Description:
case, the compiler apparently inserted a short jump instruction with zero displacement before the
expected long jump instruction. The OEM device stuttered, but recovered to execute the long
jump, while the device instruction pointer was corrupted, causing the lockup. In summary, a
short jump with zero displacement is a corner case that does not work in the device.
Workaround:
Errata No. 3
Problem:
Description:
timeouts. The addition of 10K ohm pullups to the wr_n and rd_n outputs seemed to solve the
issue. Further analysis of the OEM device shows the presence of undocumented pullups on these
pins, which will pull them high when the reset condition tristates these pins. The device does not
include internal pullups on these pins allowing these outputs to float during reset.
Workaround:
the end of reset.
Errata No. 4
Problem:
Description:
continuous mode with no external timer input stimulus to initiate/continue count.
Workaround:
Errata No. 5
Problem:
Lock up just after reset is released.
Intermittent startup.
Timer operation in continuous mode.
DMA interrupt will not bring device out of halt state.
Usually the first instruction is a long jump to the start of the user’s code. In this
Processor either came out of reset normally, or would go into a series of watchdog
The timers (Timer 0 and Timer 1) do not function per the specification when set in
Do not use a short jump instruction with zero displacement.
Add 10K ohm pullups to wr_n and rd_n pins to guarantee proper logic levels at
None.
®
UNCONTROLLED WHEN PRINTED OR COPIED
Page 143 of 145
IA211050831-16
December 24, 2008
http://www.Innovasic.com
Customer Support:
Data Sheet
1-888-824-4184

Related parts for ia186em