OR3T125 Agere Systems, OR3T125 Datasheet - Page 81

• Manufacturer Part Number: OR3T125
• Description: 3C and 3T Field-Programmable Gate Arrays
• Manufacturer: Agere Systems

Data Sheet
June 1999
Lucent Technologies Inc.
Programmable Clock Manager (PCM)
Table 31. PCM Control Registers (continued)
Register 4—DLL 1x Duty-Cycle Programming
Register 5—Mode Programming
Bits [2:0]
Bits [5:3]
Bits [7:6]
Bits [7:5]
Bit #
Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Duty-Cycle/Delay Selection for Duty Cycle/Delays Less Than or Equal to 50%. The duty-
cycle/delay is (value of bits [7:6]) * 25% + ((value of bits [2:0]) + 1) * 3.125%. See the description
for bits [7:6].
Duty-Cycle/Delay Selection for Duty Cycle/Delays Greater Than 50%. The duty-cycle/delay
is (value of bits [7:6]) * 25% + ((value of bits [5:3]) + 1) * 3.125%. See the description for bits [7:6].
Master Duty Cycle Control:
Example: A 40.625% duty cycle, bits [7:0] are 01 XXX 100, where X is a don’t care because the
duty cycle is not greater than 50%.
Example: The PCM output clock should be delayed 96.875% (31/32) of the input clock period.
Bits [7:0] are 11110XXX, which is 78.125% from bits [7:6] and 18.75% from bits [5:3]. Bits [2:0]
are don’t care (X) because the delay is greater than 50%.
DLL/PLL Mode Selection Bit. 0 = DLL, 1 = PLL. Default is DLL mode.
Reserved.
PLL Phase Detector Feedback Input Selection Bit. 0 = feedback signal from routing/
ExpressCLK , 1 = feedback from programmable delay line output. Default is 0. Has no effect in
DLL mode.
Reserved.
1x/2x Clock Selection Bit for DLL Mode. 0 = 1x clock output, 1 = 2x clock output. Default is 1x
clock output. Has no effect in PLL mode.
Reserved.
00: duty cycle 3.125% to 25%
01: duty cycle 28.125% to 50%
10: duty cycle 53.125% to 75%
11: duty cycle 78.125% to 96.875%
(continued)
Function
ORCA Series 3C and 3T FPGAs
81