MCP1631RD-DCPC1 Microchip Technology, MCP1631RD-DCPC1 Datasheet - Page 131

• Manufacturer Part Number: MCP1631RD-DCPC1
• Description: REF DES BATT CHARG OR LED DRIVER
• Manufacturer: Microchip Technology

Specifications of MCP1631RD-DCPC1

• Current - Output / Channel: 700mA
• Outputs And Type: 1, Non-Isolated
• Features: Firmware for Li-Ion, NiMH, and NiCd Battery Charger
• Voltage - Input: 3.5 ~ 16 V
• Utilized Ic / Part: MCP1631HV, PIC16F616
• Core Chip: MCP1631HV, PIC16F616
• Topology: Parallel, Series
• Output Current: 1A
• No. Of Outputs: 1
• Input Voltage: 3.5V To 16V
• Dimming Control Type: Analog
• Kit Contents: Board
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Voltage - Output: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

13.2
ADDLW
Syntax:
Operands:
Operation:
Status Affected:
Description:
ADDWF
Syntax:
Operands:
Operation:
Status Affected:
Description:
ANDLW
Syntax:
Operands:
Operation:
Status Affected:
Description:
ANDWF
Syntax:
Operands:
Operation:
Status Affected:
Description:
© 2009 Microchip Technology Inc.
Instruction Descriptions
Add W and f
[ label ] ADDWF
0 ≤ f ≤ 127
d ∈ [0,1]
(W) + (f) → (destination)
C, DC, Z
Add the contents of the W register
with register ‘f’. If ‘d’ is ‘0’, the
result is stored in the W register. If
‘d’ is ‘1’, the result is stored back
in register ‘f’.
AND W with f
[ label ] ANDWF
0 ≤ f ≤ 127
d ∈ [0,1]
(W) .AND. (f) → (destination)
Z
AND the W register with register
‘f’. If ‘d’ is ‘0’, the result is stored in
the W register. If ‘d’ is ‘1’, the
result is stored back in register ‘f’.
[ label ] ADDLW
0 ≤ k ≤ 255
(W) + k → (W)
C, DC, Z
The contents of the W register
are added to the eight-bit literal ‘k’
and the result is placed in the
W register.
[ label ] ANDLW
0 ≤ k ≤ 255
(W) .AND. (k) → (W)
Z
The contents of W register are
AND’ed with the eight-bit literal
‘k’. The result is placed in the W
register.
Add literal and W
AND literal with W
f,d
f,d
k
k
PIC16F610/616/16HV610/616
BCF
Syntax:
Operands:
Operation:
Status Affected:
Description:
BSF
Syntax:
Operands:
Operation:
Status Affected:
Description:
BTFSC
Syntax:
Operands:
Operation:
Status Affected:
Description:
Bit Test f, Skip if Clear
[ label ] BTFSC f,b
0 ≤ f ≤ 127
0 ≤ b ≤ 7
skip if (f<b>) = 0
None
If bit ‘b’ in register ‘f’ is ‘1’, the next
instruction is executed.
If bit ‘b’ in register ‘f’ is ‘0’, the next
instruction is discarded, and a NOP
is executed instead, making this a
two-cycle instruction.
Bit Clear f
[ label ] BCF
0 ≤ f ≤ 127
0 ≤ b ≤ 7
0 → (f<b>)
None
Bit ‘b’ in register ‘f’ is cleared.
Bit Set f
[ label ] BSF
0 ≤ f ≤ 127
0 ≤ b ≤ 7
1 → (f<b>)
None
Bit ‘b’ in register ‘f’ is set.
f,b
f,b
DS41288F-page 131