MCP1631RD-DCPC1 Microchip Technology, MCP1631RD-DCPC1 Datasheet - Page 137

• Manufacturer Part Number: MCP1631RD-DCPC1
• Description: REF DES BATT CHARG OR LED DRIVER
• Manufacturer: Microchip Technology

Specifications of MCP1631RD-DCPC1

• Current - Output / Channel: 700mA
• Outputs And Type: 1, Non-Isolated
• Features: Firmware for Li-Ion, NiMH, and NiCd Battery Charger
• Voltage - Input: 3.5 ~ 16 V
• Utilized Ic / Part: MCP1631HV, PIC16F616
• Core Chip: MCP1631HV, PIC16F616
• Topology: Parallel, Series
• Output Current: 1A
• No. Of Outputs: 1
• Input Voltage: 3.5V To 16V
• Dimming Control Type: Analog
• Kit Contents: Board
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Voltage - Output: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

SUBWF
Syntax:
Operands:
Operation:
Status Affected: C, DC, Z
Description:
SWAPF
Syntax:
Operands:
Operation:
Status Affected:
Description:
XORLW
Syntax:
Operands:
Operation:
Status Affected:
Description:
© 2009 Microchip Technology Inc.
Subtract W from f
[ label ] SUBWF f,d
0 ≤ f ≤ 127
d ∈ [0,1]
(f) - (W) → (destination)
Subtract (2’s complement method)
W register from register ‘f’. If ‘d’ is
‘0’, the result is stored in the W
register. If ‘d’ is ‘1’, the result is
stored back in register ‘f’.
C = 0
C = 1
DC = 0
DC = 1
(f<3:0>) → (destination<7:4>),
The upper and lower nibbles of
Swap Nibbles in f
[ label ] SWAPF f,d
0 ≤ f ≤ 127
d ∈ [0,1]
(f<7:4>) → (destination<3:0>)
None
register ‘f’ are exchanged. If ‘d’ is
‘0’, the result is placed in the W
register. If ‘d’ is ‘1’, the result is
placed in register ‘f’.
Exclusive OR literal with W
[ label ] XORLW k
0 ≤ k ≤ 255
(W) .XOR. k → (W)
Z
The contents of the W register
are XOR’ed with the eight-bit
literal ‘k’. The result is placed in
the W register.
W > f
W ≤ f
W<3:0> > f<3:0>
W<3:0> ≤ f<3:0>
PIC16F610/616/16HV610/616
XORWF
Syntax:
Operands:
Operation:
Status Affected:
Description:
[ label ] XORWF
0 ≤ f ≤ 127
d ∈ [0,1]
(W) .XOR. (F.) → (destination)
Z
W register with register ‘f’. If ‘d’ is
‘0’, the result is stored in the W
register. If ‘d’ is ‘1’, the result is
stored back in register ‘f’.
Exclusive OR W with f
Exclusive OR the contents of the
DS41288F-page 137
f,d