C8051F360DK Silicon Laboratories Inc, C8051F360DK Datasheet - Page 284

• Manufacturer Part Number: C8051F360DK
• Description: KIT DEV FOR C8051F360 FAMILY
• Manufacturer: Silicon Laboratories Inc
• Type: MCUr

Specifications of C8051F360DK

• Contents: Evaluation Board, Power Supply, USB Cables, Adapter and Documentation
• Processor To Be Evaluated: C8051F36x
• Interface Type: USB
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: C8051F360, F361, F362, F363, F364, F365, F366, F367, F368, F369
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 336-1410

C8051F360/1/2/3/4/5/6/7/8/9
24. C2 Interface
C8051F36x devices include an on-chip Silicon Laboratories 2-Wire (C2) debug interface to allow Flash
programming and in-system debugging with the production part installed in the end application. The C2
interface uses a clock signal (C2CK) and a bi-directional C2 data signal (C2D) to transfer information
between the device and a host system. See the C2 Interface Specification for details on the C2 protocol.
24.1. C2 Interface Registers
The following describes the C2 registers necessary to perform Flash programming functions through the
C2 interface. All C2 registers are accessed through the C2 interface as described in the C2 Interface Spec-
ification.
284
Bits7–0: The C2ADD register is accessed via the C2 interface to select the target Data register for
This read-only register returns the 8-bit device ID: 0x12.
C2 Address:
Address
Bit7
Bit7
0xBF
0x00
0x01
0x02
C2 Data Read and Data Write commands.
0x00
Bit6
Bit6
Selects the C2 Flash Programming Control register for Data Read/Write instructions
Selects the C2 Flash Programming Data register for Data Read/Write instructions
C2 Register Definition 24.2. DEVICEID: C2 Device ID
C2 Register Definition 24.1. C2ADD: C2 Address
Selects the Device ID register for Data Read instructions (DEVICEID)
Selects the Revision ID register for Data Read instructions (REVID)
Bit5
Bit5
Bit4
Bit4
Rev. 1.0
Bit3
Bit3
Description
(FPCTL)
(FPDAT)
Bit2
Bit2
Bit1
Bit1
Bit0
Bit0
00000000
00010010
Reset Value
Reset Value