MCIMX35WPDKJ Freescale Semiconductor, MCIMX35WPDKJ Datasheet - Page 17

• Manufacturer Part Number: MCIMX35WPDKJ
• Description: BOARD DEV FOR I.MX35
• Manufacturer: Freescale Semiconductor
• Series: i.MX35r
• Type: MPUr

Specifications of MCIMX35WPDKJ

• Contents: Module and Misc Hardware
• Processor To Be Evaluated: i.MX35
• Processor Series: i.MX35
• Data Bus Width: 32 bit
• Interface Type: RS-232, Ethernet, USB, CAN, JTAG
• Core: ARM11
• For Use With/related Products: i.MX35
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Figure 2
4.3.2
The power-up sequence in reverse order is recommended for powering down. However, all power supplies
can be shut down at the same time.
4.4
There are two ways of resetting the i.MX35 using external pins:
Freescale Semiconductor
4. Turn on all other power supplies: PHY1_VDDA, USBPHY1_VDDA_BIAS, PHY2_VDD,
5. Wait until PHY1_VDDA, USBPHY1_VDDA_BIAS, PHY2_VDD, USBPHY1_UPLLVDD,
6. Deassert the POR signal.
•
USBPHY1_UPLLVDD, OSC24M_VDD, OSC_AUDIO_VDD, MVDD, PVDD, FUSEVDD.
(Always FUSE_VDD should be connected to ground, except when eFuses are to be
programmed.)
OSC24M_VDD, OSC_AUDIO_VDD, MVDD, PVDD, (FUSEVDD, optional). Power supplies
are stable + 100 μs.
Power On Reset (using the POR_B pin)
shows the power-up sequence and timing.
Reset Timing
Powering Down
i.MX35 Applications Processors for Industrial and Consumer Products, Rev. 9
Figure 2. i.MX35 Power-Up Sequence and Timing
17