MCIMX35WPDKJ Freescale Semiconductor, MCIMX35WPDKJ Datasheet - Page 19

• Manufacturer Part Number: MCIMX35WPDKJ
• Description: BOARD DEV FOR I.MX35
• Manufacturer: Freescale Semiconductor
• Series: i.MX35r
• Type: MPUr

Specifications of MCIMX35WPDKJ

• Contents: Module and Misc Hardware
• Processor To Be Evaluated: i.MX35
• Processor Series: i.MX35
• Data Bus Width: 32 bit
• Interface Type: RS-232, Ethernet, USB, CAN, JTAG
• Core: ARM11
• For Use With/related Products: i.MX35
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

532 MHz. Common supplies have been bundled according to the i.MX35 power-up sequence
requirements. Peak numbers are provided for system designers so that the i.MX35 power supply
requirements will be satisfied during startup and transient conditions. Freescale recommends that system
current measurements be taken with customer-specific use-cases to reflect normal operating conditions in
the end system.
1
The method for obtaining max current is as follows:
4.6
The thermal resistance characteristics for the device are given in
under the following conditions:
Freescale Semiconductor
QVCC
MVDD, PVDD
NVCC_EMI1, NVCC_EMI2, NVCC_EMI3, NVCC_LCDC, NVCC_NFC
FUSE_VDD
NVCC_MISC, NVCC_CSI, NVCC_SDIO, NVCC_CRM, NVCC_ATA, NVCC_MLB,
NVCC_JTAG
OSC24M_VDD, OSC_AUDIO_VDD, PHY1_VDDA, PHY2_VDD,
USBPHY1_UPLLVDD, USBPHY1_VDDA_BIAS
This rail is connected to ground; it only needs a voltage if eFuses are to be programmed. FUSE_VDD should be supplied by
following the power up sequence given in
1. Measure worst case power consumption on individual rails using directed test on i.MX35.
2. Correlate worst case power consumption power measurements with worst case power
3. Combine common voltage rails based on power supply sequencing requirements
4. Guard band worst case numbers for temperature and process variation. Guard band is based on
5. The sum of individual rails is greater than real world power consumption, as a real system does
•
•
•
•
•
•
•
•
consumption simulations.
process data and correlated with actual data measured on i.MX35.
not typically maximize power consumption on all peripherals simultaneously.
Two-layer substrate
Substrate solder mask thickness: 0.025 mm
Substrate metal thicknesses: 0.016 mm
Substrate core thickness: 0.200 mm
Core via I.D: 0.168 mm, Core via plating 0.016 mm.
Full array map design, but nearly all balls under die are power or ground.
Die Attach: 0.033 mm non-conductive die attach, k = 0.3 W/m K
Mold compound: k = 0.9 W/m K
Thermal Characteristics
1
i.MX35 Applications Processors for Industrial and Consumer Products, Rev. 9
Power Supply
Section 4.3.1, “Powering Up.”
Table 11. Power Consumption
Table
12. These values were measured
Voltage (V)
1.47
1.65
1.9
3.6
3.6
3.6
Max Current (mA)
400
20
90
62
60
25
19