SI1011-A-GM Silicon Laboratories Inc, SI1011-A-GM Datasheet - Page 354

• Manufacturer Part Number: SI1011-A-GM
• Description: IC TXRX MCU + EZRADIOPRO
• Manufacturer: Silicon Laboratories Inc

Specifications of SI1011-A-GM

• Package / Case: 42-QFN
• Frequency: 240MHz ~ 960MHz
• Data Rate - Maximum: 256kbps
• Modulation Or Protocol: FSK, GFSK, OOK
• Applications: General Purpose
• Power - Output: 20dBm
• Sensitivity: -121dBm
• Voltage - Supply: 1.8 V ~ 3.6 V
• Current - Receiving: 18.5mA
• Current - Transmitting: 85mA
• Data Interface: PCB, Surface Mount
• Memory Size: 8kB Flash, 768B RAM
• Antenna Connector: PCB, Surface Mount
• Number Of Receivers: 1
• Number Of Transmitters: 1
• Wireless Frequency: 240 MHz to 960 MHz
• Interface Type: UART, SMBus, SPI, PCA
• Output Power: 20 dBm
• Operating Supply Voltage: 0.9 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Maximum Supply Current: 4 mA
• Minimum Operating Temperature: - 40 C
• Modulation: FSK, GFSK, OOK
• Protocol Supported: C2, SMBus
• Core: 8051
• Program Memory Type: Flash
• Program Memory Size: 8 KB
• Data Ram Size: 768 B
• Supply Current (max): 4 mA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Operating Temperature: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 336-1872-5

Si1010/1/2/3/4/5
27.3. Timer 3
Timer 3 is a 16-bit timer formed by two 8-bit SFRs: TMR3L (low byte) and TMR3H (high byte). Timer 3 may
operate in 16-bit auto-reload mode or (split) 8-bit auto-reload mode. The T3SPLIT bit (TMR2CN.3) defines
the Timer 3 operation mode. Timer 3 can also be used in Capture Mode to measure the external oscillator
source or the Comparator 1 period with respect to another oscillator. The ability to measure the
Comparator 1 period with respect to the system clock is makes using Touch Sense Switches very easy.
Timer 3 may be clocked by the system clock, the system clock divided by 12, external oscillator source
divided by 8, or Comparator 1 output. The external oscillator source divided by 8 and Comparator 1 output
is synchronized with the system clock.
27.3.1. 16-Bit Timer with Auto-Reload
When T3SPLIT (TMR3CN.3) is zero, Timer 3 operates as a 16-bit timer with auto-reload. Timer 3 can be
clocked by SYSCLK, SYSCLK divided by 12, external oscillator clock source divided by 8, or Comparator 1
output. As the 16-bit timer register increments and overflows from 0xFFFF to 0x0000, the 16-bit value in
the Timer 3 reload registers (TMR3RLH and TMR3RLL) is loaded into the Timer 3 register as shown in
Figure 27.7, and the Timer 3 High Byte Overflow Flag (TMR3CN.7) is set. If Timer 3 interrupts are enabled
(if EIE1.7 is set), an interrupt will be generated on each Timer 3 overflow. Additionally, if Timer 3 interrupts
are enabled and the TF3LEN bit is set (TMR3CN.5), an interrupt will be generated each time the lower 8
bits (TMR3L) overflow from 0xFF to 0x00.
354
External Clock / 8
Comparator 1
SYSCLK / 12
T3XCLK[1:0]
00
01
11
SYSCLK
Figure 27.7. Timer 3 16-Bit Mode Block Diagram
T
M
H
3
M
T
3
L
0
1
CKCON
M
T
H
2
M
T
2
L
TR3
M
T
1
M
T
0
S
C
A
1
S
C
A
0
TCLK
Rev. 1.0
TMR3RLL TMR3RLH
TMR3L
TMR3H
Reload
To ADC
T3XCLK1
T3XCLK0
TF3CEN
T3SPLIT
TF3LEN
TF3H
TF3L
TR3
Interrupt