PIC18F65K90-I/MR Microchip Technology, PIC18F65K90-I/MR Datasheet - Page 177

• Manufacturer Part Number: PIC18F65K90-I/MR
• Description: 32kB Flash, 2kB RAM, 1kB EE, NanoWatt XLP, LCD 64 QFN 9x9x0.9mm TUBE
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F65K90-I/MR

• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Program Memory Type: Flash
• Program Memory Size: 32 KB
• Data Ram Size: 2 KB
• Interface Type: I2C, SPI
• Maximum Clock Frequency: 64 MHz
• Number Of Timers: 8
• Operating Supply Voltage: 1.8 V to 5.5 V
• Maximum Operating Temperature: + 125 C
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 12 bit, 16 Channel
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 64MHz
• Connectivity: I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LCD, POR, PWM, WDT
• Number Of I /o: 53
• Eeprom Size: 1K x 8
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 16x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-VFQFN Exposed Pad
• Lead Free Status / Rohs Status: Details

11.9
PORTH is an 8-bit wide, bidirectional I/O port. The
corresponding Data Direction and Output Latch registers
are TRISH and LATH.
All pins on PORTH are implemented with Schmitt
Trigger input buffers. Each pin is individually
configurable as an input or output.
All
ADC/CCP/Comparator
controlled by the LCDSE5 register. I/O port functions are
only available when the segments are disabled.
 2009-2011 Microchip Technology Inc.
Note:
PORTH
PORTH, LATH and
TRISH Registers
PORTH is available only on the 80-pin
devices.
pins
are
and
multiplexed
LCD
segment
with
drives
the
PIC18F87K90 FAMILY
EXAMPLE 11-8:
BANKSEL ANCON2
CLRF
CLRF
MOVLW
MOVWF
MOVLW
MOVWF
MOVLW
MOVWF
PORTH
LATH
0Fh
ANCON2
0Fh
ANCON1
0CFh
TRISH
INITIALIZING PORTH
; Initialize PORTH by
; clearing output
; data latches
; Alternate method
; to clear output
; data latches
; Configure PORTH as
; digital I/O
; Configure PORTH as
; digital I/O
; Value used to
; initialize data
; direction
; Set RH3:RH0 as inputs
; RH5:RH4 as outputs
; RH7:RH6 as inputs
DS39957D-page 177