AMD-766AC AMD [Advanced Micro Devices], AMD-766AC Datasheet - Page 63

• Manufacturer Part Number: AMD-766AC
• Description: Peripheral Bus Controller
• Manufacturer: AMD [Advanced Micro Devices]

23167B – March 2001
C3A50: Power State Pin Control Register
Configuration space; function 3; offset: 53-50h. Default: 1800_0000h. Read-write.
The bits[23:0] of this register specify the output pins controlled during C2, C3, and POS transitions. Each byte
provides the enables for each low-power states. C2 is specified by bits[7:0], C3 is specified by bits [15:8], and POS is
specified by bits[23:16]. See section 4.6.1.5 for timing details.
Note: The reserved bits in this register are read-write accessible, however they control no hardware.
31
APIC_POSEN
23
CRST_POSEN
15
CRST_C3EN
7
CRST_C2EN
ZZ_[POS,C3,C2]EN. Enable CACHE_ZZ assertion to the L2 cache during power management. 1=Enable control
of the CACHE_ZZ pin during the specified C2, C3, and POS states. 0=CACHE_ZZ is not asserted. This bit has no
effect if the PMC8 does not select the CACHE_ZZ function.
DCST_[POS,C3,C2]EN. Enable DCSTOP# assertion to the DRAM controller during power management.
1=Enable control of the DCSTOP# pin during the specified C2, C3, and POS states. 0=DCSTOP# is not asserted.
[POS,C3,C2]EN. Enable STPCLK# during power management. 1=Enable control of the STPCLK# pin during the
specified C2, C3, and POS states. 0=STPCLK# is not asserted during C2, C3, and POS. This bit required to be set
for any of the other bits in this register’s byte to function (i.e., if STPCLK# is not asserted for a given power state,
then no other power management control signals are asserted for that power state).
CSTP_[POS,C3,C2]EN. Enable CPUSTOP# assertion to the external PLL during power management. 1=Enable
control of the CPUSTOP# pin during the specified C2, C3, and POS states. 0=CPUSTOP# is not asserted. This bit
has no effect if the PMC6 does not select the CPUSTOP# function.
PSTP_[POS,C3,C2]EN. Enable PCISTOP# assertion to the external PLL during power management. 1=Enable
control of the PCISTOP# pin during the specified C2, C3, and POS states. 0=PCISTOP# is not asserted. This bit
has no effect if the PMC7 does not select the PCISTOP# function.
CSLP_[POS,C3,C2]EN. Enable CPUSLEEP# assertion to the processor during power management. 1=Enable
control of the CPUSLEEP# pin during the specified C2, C3, and POS states. 0=CPUSLEEP# is not asserted. This
bit has no effect if the PMC5 does not select the CPUSLEEP# function.
SUSP_[POS,C3,C2]EN. Enable SUSPEND# assertion during power management. 1=Enable control of the
SUSPEND# pin during the specified C2, C3, and POS states. 0=SUSPEND# is always high. This bit has no effect if
the PMC4 does not select the SUSPEND# function.
CRST_[POS,C3,C2]EN. Enable assertion of CPURST# during transition to FON. 1=Enables assertion of the
CPURST# pin during the transition to FON from the specified C2, C3, and POS states. 0=CPURST# is not asserted
during the specified transition. This bit should not be set unless the corresponding SUSP_[POS,C3,C2]EN bit is set
(i.e., processor resets are only allowed if SUSPEND# gets asserted).
PITRSM#. Enable the PIT to generate interrupts during POS. 1=Legacy PIT does not generate IRQ0 while in POS,
starting from the time that the command to enter POS is sent to PM04. This is necessary to prevent timer-tick
interrupts from resuming the system while in POS. 0=PIT generates IRQ0 while in POS.
30
Reserved
22
SUSP_POSEN
14
SUSP_C3EN
6
SUSP_C2EN
29
TTHLOCK
21
CSLP_POSEN
13
CSLP_C3EN
5
CSLP_C2EN
28
TTH_EN
20
PSTP_POSEN
12
PSTP_C3EN
4
PSTP_C2EN
Preliminary Information
27:25
TTH_RATIO
19
CSTP_POSEN
11
CSTP_C3EN
3
CSTP_C2EN
AMD-766
18
POSEN
10
C3EN
2
C2EN
TM
Peripheral Bus Controller Data Sheet
DCST_C3EN
DCST_C2EN
17
DCST_POSEN
9
1
24
PITRSM#
16
ZZ_POSEN
8
ZZ_C3EN
0
ZZ_C2EN
63