PIC16F785-I/SO Microchip Technology, PIC16F785-I/SO Datasheet - Page 84

• Manufacturer Part Number: PIC16F785-I/SO
• Description: IC PIC MCU FLASH 2KX14 20SOIC
• Manufacturer: Microchip Technology
• Series: PIC® 16Fr

Specifications of PIC16F785-I/SO

• Program Memory Type: FLASH
• Program Memory Size: 3.5KB (2K x 14)
• Package / Case: 20-SOIC (7.5mm Width)
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 20MHz
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 17
• Eeprom Size: 256 x 8
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 5.5 V
• Data Converters: A/D 14x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC16F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 128 B
• Interface Type: RS- 232/USB
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 17
• Number Of Timers: 3
• Operating Supply Voltage: 2 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000, DV164120, DM163029
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 14-ch x 10-bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: XLT20SO1-1 - SOCKET TRANS ICE 20DIP TO 20SOICXLT18SO-1 - SOCKET TRANSITION 18SOIC 300MILAC162060 - HEADER INTRFC MPLAB ICD2 20PINAC164039 - MODULE SKT PROMATE II 20DIP/SOIC
• Connectivity: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

PIC16F785
12.1.7
After the A/D module has been configured as desired,
the selected channel must be acquired before the
conversion is started. The analog input channels must
have their corresponding TRIS bits selected as inputs.
To determine sample time, see Section 18.0 “Electri-
cal Specifications”. After this sample time has
elapsed the A/D conversion can be started.
These steps should be followed for an A/D conversion:
1.
2.
3.
4.
5.
6.
7.
DS41249A-page 82
Configure the A/D module:
• Configure analog/digital I/O (ANSx)
• Configure voltage reference (ADCON0)
• Select A/D input channel (ADCON0)
• Select A/D conversion clock (ADCON1)
• Turn on A/D module (ADCON0)
Configure A/D interrupt (if desired):
• Clear ADIF bit (PIR1<6>)
• Set ADIE bit (PIE1<6>)
• Set PEIE and GIE bits (INTCON<7:6>)
Wait the required acquisition time.
Start conversion:
• Set GO/DONE bit (ADCON0<1>)
Wait for A/D conversion to complete, by either:
• Polling for the GO/DONE bit to be cleared
• Waiting for the A/D interrupt
Read A/D Result register pair
(ADRESH:ADRESL), clear bit ADIF if required.
For next conversion, go to step 1 or step 2 as
required. The A/D conversion time per bit is
defined as T
required before the next acquisition starts.
(with interrupts disabled); OR
CONFIGURING THE A/D
AD
. A minimum wait of 2 T
AD
is
Preliminary
EXAMPLE 12-1:
;This code block configures the A/D
;for polling, Vdd reference, R/C clock
;and RA0 input.
;
;Conversion start & wait for complete
;polling code included.
;
BCF
BSF
MOVLW
MOVWF
BSF
BSF
BCF
MOVLW
MOVWF
CALL
BSF
BTFSC
GOTO
MOVF
MOVWF
BSF
MOVF
BCF
MOVWF
STATUS,RP1
STATUS,RP0
B’01110000’ ;A/D RC clock
ADCON1
TRISA,0
ANSEL0,0
STATUS,RP0
B’10000001’ ;Right, Vdd Vref, AN0
ADCON0
SampleTime
ADCON0,GO
ADCON0,GO
$-1
ADRESH,W
RESULTHI
STATUS,RP0
ADRESL,W
STATUS,RP0
RESULTLO
A/D CONVERSION
 2004 Microchip Technology Inc.
;Bank 1
;
;Set RA0 to input
;Set RA0 to analog
;Bank 0
;Wait min sample time
;Start conversion
;Is conversion done?
;No, test again
;Read upper 2 bits
;Bank 1
;Read lower 8 bits
;Bank 0