MCF5214CVF66 Freescale Semiconductor, MCF5214CVF66 Datasheet - Page 652

• Manufacturer Part Number: MCF5214CVF66
• Description: IC MPU 32BIT COLDF 256-MAPBGA
• Manufacturer: Freescale Semiconductor
• Series: MCF521xr

Specifications of MCF5214CVF66

• Core Processor: Coldfire V2
• Core Size: 32-Bit
• Speed: 66MHz
• Connectivity: CAN, EBI/EMI, I²C, SPI, UART/USART
• Peripherals: DMA, LVD, POR, PWM, WDT
• Number Of I /o: 142
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 64K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 256-MAPBGA
• Package: 256MA-BGA
• Device Core: ColdFire
• Family Name: MCF521x
• Maximum Speed: 66 MHz
• Operating Supply Voltage: 3.3 V
• Data Bus Width: 32 Bit
• Number Of Programmable I/os: 142
• Interface Type: QSPI/UART/I2C/CAN
• On-chip Adc: 8-chx10-bit
• Number Of Timers: 8
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Debug Support
)
Likewise, the following BDM sequence is needed to write an accumulator register:
BdmWriteACCn (
)
Additionally, it is required that writes to the accumulator extension registers be performed after the
corresponding accumulators are updated. This is needed since a write to any accumulator alters the
contents of the corresponding extension register.
For more information on saving and restoring the complete EMAC programming model, see
Section 3.3.1.2, “Saving and Restoring the EMAC Programming
30.5.3.3.10 Write Control Register (
The operand (longword) data is written to the specified control register. The write alters all 32 register bits.
Command/Result Formats:
30-34
rcreg
wcreg
rcreg
wcreg
wcreg
wcreg
Command
Result
accn;
#saved_data,macsr;// restore the original macsr
macsr;
#0,macsr;
#data,accn;
#saved_data,macsr;// restore the original macsr
15
MCF5282 and MCF5216 ColdFire Microcontroller User’s Manual, Rev. 3
0x2
0x0
0x0
Figure 30-35.
12
// read the desired accumulator
// read macsr contents & save
// disable all rounding modes
// write the desired accumulator
11
WCREG
WCREG
0x8
0x0
)
Command/Result Formats
D[31:16]
8
D[15:0]
7
Model”.
0x8
0x0
Rc
4
3
Freescale Semiconductor
0x0
0x0
0