S912XEQ384J3CAL Freescale Semiconductor, S912XEQ384J3CAL Datasheet - Page 384

• Manufacturer Part Number: S912XEQ384J3CAL
• Description: IC MCU 16BIT 384KB FLASH 112LQFP
• Manufacturer: Freescale Semiconductor
• Series: HCS12r

Specifications of S912XEQ384J3CAL

• Core Processor: HCS12X
• Core Size: 16-Bit
• Speed: 50MHz
• Connectivity: CAN, EBI/EMI, I²C, IrDA, SCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 91
• Program Memory Size: 384KB (384K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 4K x 8
• Ram Size: 24K x 8
• Voltage - Supply (vcc/vdd): 1.72 V ~ 5.5 V
• Data Converters: A/D 16x12b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 112-LQFP
• Core: HCS12X
• Data Bus Width: 16 bit
• Data Ram Size: 24 KB
• Interface Type: SCI, SPI, I2C, CAN
• Maximum Clock Frequency: 50 MHz
• Number Of Programmable I/os: 91
• Number Of Timers: 1
• Operating Supply Voltage: 3.13 V to 5.5 V
• Maximum Operating Temperature: + 260 C
• Mounting Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Chapter 10 XGATE (S12XGATEV3)
10.8
10.8.1
For the ease of implementation the architecture is a strict Load/Store RISC machine, which means all
operations must have one of the eight general purpose registers R0 … R7 as their source as well their
destination.
All word accesses must work with a word aligned address, that is A[0] = 0!
10.8.1.1
10.8.1.2
Instructions that use this addressing mode either have no operands or all operands are in internal XGATE
registers.
Examples:
384
Because of an order from the United States International Trade Commission, BGA-packaged product lines and partnumbers
indicated here currently are not available from Freescale for import or sale in the United States prior to September 2010
RD
RD.L
RD.H
RS, RS1, RS2
RS.L, RS1.L, RS2.L
RS.H, RS1.H, RS2.H
RB
RI
RI+
–RI
Instruction Set
BRK
RTS
Addressing Modes
Naming Conventions
Inherent Addressing Mode (INH)
Even though register R1 is intended to be used as a pointer to the data
segment, it may be used as a general purpose data register as well.
Selecting R0 as destination register will discard the result of the instruction.
Only the condition code register will be updated
MC9S12XE-Family Reference Manual , Rev. 1.23
Destination register, allowed range is R0–R7
Low byte of the destination register, bits [7:0]
High byte of the destination register, bits [15:8]
Source register, allowed range is R0–R7
Low byte of the source register, bits [7:0]
High byte of the source register, bits[15:8]
Base register for indexed addressing modes, allowed
range is R0–R7
Offset register for indexed addressing modes with
register offset, allowed range is R0–R7
Offset register for indexed addressing modes with
register offset and post-increment,
Allowed range is R0–R7 (R0+ is equivalent to R0)
Offset register for indexed addressing modes with
register offset and pre-decrement,
Allowed range is R0–R7 (–R0 is equivalent to R0)
NOTE
Freescale Semiconductor