IDT82P2282PF IDT, Integrated Device Technology Inc, IDT82P2282PF Datasheet - Page 125

• Manufacturer Part Number: IDT82P2282PF
• Description: TXRX T1/J1/E1 2CHAN 100-TQFP
• Manufacturer: IDT, Integrated Device Technology Inc
• Type: Transceiverr

Specifications of IDT82P2282PF

• Number Of Drivers/receivers: 2/2
• Protocol: IEEE 1149.1
• Voltage - Supply: 3 V ~ 3.6 V
• Mounting Type: Surface Mount
• Package / Case: 100-TQFP, 100-VQFP
• Screening Level: Industrial
• Pin Count: 100
• Mounting: Surface Mount
• Package Type: TQFP
• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 82P2282PF

5.2
selected in registers 020H and 120H.
be divided into global configuration registers and per-link configuration registers. The register with only one address following its name is the global
configuration register, and the register with a set of address (two addresses) following its name is the per-link configuration register.
T1/J1 Or E1 Mode (020H, 120H)
T1/J1:
T1 and J1 for the current link.
FM[1:0]:
mat.
TEMODE:
Programming Information
IDT82P2282
Bit Name
Default
Bit No.
Type
Depending on the operating mode, the registers are configured for T1/J1 or E1. Before setting any other registers, the operating mode should be
According to the access method, the registers can be divided into direct registers and indirect registers. In the direct registers, the registers can
This bit is valid when T1/J1 operating mode is selected by the corresponding TEMODE bit (b0, 020H,...). It selects the operating mode between
= 0: T1 mode is selected.
= 1: J1 mode is selected.
These two bits are valid when T1/J1 operating mode is selected by the corresponding TEMODE bit (b0, 020H,...). They select the operating for-
= 00: SF format is selected.
= 01: ESF format is selected.
= 10: T1 DM format is selected. This selection is valid in T1 operating mode only.
= 11: SLC-96 format is selected. This selection is valid in T1 operating mode only.
This bit selects the operating mode for the current link.
= 0: E1 mode is selected.
= 1: T1/J1 mode is selected.
REGISTER DESCRIPTION
7
6
Reserved
5
4
125
DUAL T1/E1/J1 LONG HAUL / SHORT HAUL TRANSCEIVER
T1/J1
R/W
3
0
FM1
R/W
2
0
FM0
R/W
1
0
August 20, 2009
TEMODE
R/W
0
0