IDT82P2282PF IDT, Integrated Device Technology Inc, IDT82P2282PF Datasheet - Page 90

• Manufacturer Part Number: IDT82P2282PF
• Description: TXRX T1/J1/E1 2CHAN 100-TQFP
• Manufacturer: IDT, Integrated Device Technology Inc
• Type: Transceiverr

Specifications of IDT82P2282PF

• Number Of Drivers/receivers: 2/2
• Protocol: IEEE 1149.1
• Voltage - Supply: 3 V ~ 3.6 V
• Mounting Type: Surface Mount
• Package / Case: 100-TQFP, 100-VQFP
• Screening Level: Industrial
• Pin Count: 100
• Mounting: Surface Mount
• Package Type: TQFP
• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 82P2282PF

Table 55: Related Bit / Register In Chapter 3.20.3
3.20.4
ESF format in T1/J1 mode.
the F-bit in the ESF format. The six ‘X’s represent the code that is pro-
grammed in the XBOC[5:0] bits. The BOM is transmitted only if the
XBOC[5:0] bits are not all ’One’s.
3.20.5
loopback code in a framed or unframed T1/J1 data stream.
grammed in the CL[1:0] bits and the IBC[7:0] bits respectively. The code
can only be transmitted when the IBCDEN bit is enabled. In framed
mode, which is configured by the IBCDUNFM bit, the bits in all 24 chan-
nels are overwritten with the inband loopback code and the F-bit is not
changed. In unframed mode, which is configured by the IBCDUNFM bit,
all the bits in 24 channels and the F-bit are overwritten with the inband
loopback code.
IDT82P2282
Table 56: Related Bit / Register In Chapter 3.20.4 & Chapter 3.20.5
IBCDUNFM
XBOC[5:0]
The Bit Oriented Message (BOM) can only be transmitted in the
The BOM pattern is ‘111111110XXXXXX0’ which occupies the DL of
The Inband Loopback Code Generator can only transmit inband
The length and the content of the inband loopback code are pro-
IBCDEN
IBC[7:0]
CL[1:0]
AUTOPRM
Bit
CRBIT
U1BIT
U2BIT
LBBIT
RBIT
Bit
BIT-ORIENTED MESSAGE TRANSMITTER (T1/J1 ONLY)
INBAND LOOPBACK CODE GENERATOR (T1/J1 ONLY)
XIBC Control
XBOC Code
XIBC Code
Register
APRM Control
Register
T1/J1 Address (Hex)
T1/J1 Address (Hex)
080, 180
075, 175
074, 174
07F, 17F
90
3.20.6
all the data stream if the TAIS bit and the TXDIS bit are set. The all zeros
transmission takes a higher priority.
3.20.7
will lead to one-bit deletion or one-bit repetition in the data stream to be
transmitted, that is, to change the frame alignment position. The one-bit
deletion or repetition occurs randomly.
DUAL T1/E1/J1 LONG HAUL / SHORT HAUL TRANSCEIVER
After all the above processes, all ’One’s or all ‘Zero’s will overwrite
Any transition (from ‘0’ to ‘1’ or from ‘1’ to ‘0’) on the COFAEN bit
ALL ‘ZERO’S & ALL ‘ONE’S
CHANGE OF FRAME ALIGNMENT
August 20, 2009