IDT82P2282PF IDT, Integrated Device Technology Inc, IDT82P2282PF Datasheet - Page 74

• Manufacturer Part Number: IDT82P2282PF
• Description: TXRX T1/J1/E1 2CHAN 100-TQFP
• Manufacturer: IDT, Integrated Device Technology Inc
• Type: Transceiverr

Specifications of IDT82P2282PF

• Number Of Drivers/receivers: 2/2
• Protocol: IEEE 1149.1
• Voltage - Supply: 3 V ~ 3.6 V
• Mounting Type: Surface Mount
• Package / Case: 100-TQFP, 100-VQFP
• Screening Level: Industrial
• Pin Count: 100
• Mounting: Surface Mount
• Package Type: TQFP
• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 82P2282PF

by selecting the G56K & GAP bits in the Transmit Payload Control. The
data in the corresponding gapped duration is a Don't Care condition.
3.18.1.2
1.544 Mb/s or 2.048 Mb/s. If the system data rate is 1.544 Mb/s, it works
in T1/J1 mode. If the system data rate is 2.048 Mb/s, the data stream to
be transmitted should be mapped to 1.544 Mb/s, that is, to work in T1/J1
mode E1 rate. Three kinds of schemes are provided by selecting the
MAP[1:0] bits:
of Frame N on the system side are converted into Channel 1 to Channel
15 of Frame N to the device; TS17 to TS25 of Frame N on the system
side are converted into Channel 16 to Channel 24 of Frame N to the
device. The first bit of TS26 of Frame (N-1) on the system side is con-
IDT82P2282
2.048
1.544
Mb/s
Mb/s
2.048
1.544
Mb/s
Mb/s
In the Transmit Clock Slave mode, the system data rate can be
1. T1/J1 Mode E1 Rate per G.802 (refer to Figure 25): TS1 to TS15
discarded
discarded
F
TS0
F
Transmit Clock Slave Mode
CH1
TS0
the 8th bit
CH1
TS1
TS1
Figure 26. E1 To T1/J1 Format Mapping - One Filler Every Fourth Channel Mode
CH2
CH2
TS2
TS2
CH3
TS3
Figure 25. E1 To T1/J1 Format Mapping - G.802 Mode
discarded
CH14
CH4
TS14 TS15 TS16 TS17 TS18
TS4
CH15
CH5
TS5
discarded
TS6
CH6
CH16
TS7
CH7
CH17
discarded
74
TS8
verted into the F-bit of Frame N to the device. TS0, TS16, TS27~TS31
and the other 7 bits in TS26 on the system side are all discarded.
Figure 26): The 8th bit of Frame N on the system side is converted to the
F-bit of the Frame N to the device. Then one byte of the system side is
discarded after the previous three bytes are converted into the device.
This process repeats 8 times and the conversion of one frame is com-
pleted. Then the process goes on.
TS1 to TS24 of Frame N on the system side are converted into Channel
1 to Channel 24 of Frame N to the device. The 8th bit of Frame N on the
system side is converted into the F-bit of Frame N to the device. The first
7 bits and TS25 to TS31 on the system side are all discarded.
DUAL T1/E1/J1 LONG HAUL / SHORT HAUL TRANSCEIVER
2. T1/J1 Mode E1 Rate per One Filler Every Fourth CHs (refer to
3. T1/J1 Mode E1 Rate per Continuous CHs (refer to Figure 27):
TS9
CH23
CH22
TS24 TS25
discarded
TS28 TS29 TS30 TS31
CH24
the 1st bit
CH23
F
CH24
discarded discarded discarded
TS26 TS27~TS31
CH1
discarded
F
CH2
CH1
TS0
the 8th bit
CH2
August 20, 2009
TS0
TS1
CH23
TS1