IDT82P2282PF IDT, Integrated Device Technology Inc, IDT82P2282PF Datasheet - Page 233

• Manufacturer Part Number: IDT82P2282PF
• Description: TXRX T1/J1/E1 2CHAN 100-TQFP
• Manufacturer: IDT, Integrated Device Technology Inc
• Type: Transceiverr

Specifications of IDT82P2282PF

• Number Of Drivers/receivers: 2/2
• Protocol: IEEE 1149.1
• Voltage - Supply: 3 V ~ 3.6 V
• Mounting Type: Surface Mount
• Package / Case: 100-TQFP, 100-VQFP
• Screening Level: Industrial
• Pin Count: 100
• Mounting: Surface Mount
• Package Type: TQFP
• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 82P2282PF

RCRB:
address corresponds to one channel.
T1/J1 Extracted Signaling Data/Extract Enable Register (01H ~ 18H)
EXTRACT:
A, B, C, D:
Programming Information
IDT82P2282
Bit Name
Default
Bit No.
Type
The indirect registers of RCRB addressed from 01H to 18H are the Extracted Signaling Data / Extract Enable Registers for CH1 to CH24. Each
This bit is valid when the SF/ESF/SLC-96 frame is synchronized.
= 0: Disable the signaling bits extraction.
= 1: The signaling bits are extracted to the A,B,C,D bits (b3~0, T1/J1-ID-01~18H).
In T1-DM format, there is no signaling bits. The EXTRACT bit of all the channels should be set to ‘0’.
These bits are valid when the EXTRACT bit (b4, T1/J1-ID-01~18H) is enabled.
These bits are the extracted signaling bits. In SF format, the C, D bits are the repetition of the signaling bits A & B.
7
Reserved
6
5
EXTRACT
R/W
4
1
233
DUAL T1/E1/J1 LONG HAUL / SHORT HAUL TRANSCEIVER
A
R
3
0
B
R
2
0
C
R
1
0
August 20, 2009
D
R
0
0