IDT82P2282PF IDT, Integrated Device Technology Inc, IDT82P2282PF Datasheet - Page 357

• Manufacturer Part Number: IDT82P2282PF
• Description: TXRX T1/J1/E1 2CHAN 100-TQFP
• Manufacturer: IDT, Integrated Device Technology Inc
• Type: Transceiverr

Specifications of IDT82P2282PF

• Number Of Drivers/receivers: 2/2
• Protocol: IEEE 1149.1
• Voltage - Supply: 3 V ~ 3.6 V
• Mounting Type: Surface Mount
• Package / Case: 100-TQFP, 100-VQFP
• Screening Level: Industrial
• Pin Count: 100
• Mounting: Surface Mount
• Package Type: TQFP
• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 82P2282PF

IDT82P2282
6
ACCESS PORT
as described in the IEEE 1149.1 standards.
registers plus a Test Access Port (TAP) controller. Control of the TAP is
achieved through signals applied to the Test Mode Select (TMS) and
Test Clock (TCK) input pins. Data is shifted into the registers via the Test
IEEE STD 1149.1 JTAG Test Access Port
The IDT82P2282 supports the digital Boundary Scan Specification
The boundary scan architecture consists of data and instruction
IEEE STD 1149.1 JTAG TEST
TRST
TMS
TCK
TDI
(Test Access Port)
Controller
TAP
DIR (Device Identification Register)
BSR (Boundary Scan Register)
IR (Instruction Register)
BR (Bypass Register)
Figure 41. JTAG Architecture
Control<6:0>
357
Data Input (TDI) pin, and shifted out of the registers via the Test Data
Output (TDO) pin. Both TDI and TDO are clocked at a rate determined
by TCK.
Register), DIR (Device Identification Register), BR (Bypass Register)
and IR (Instruction Register). These will be described in the following
pages. Refer to Figure - 41 for architecture.
DUAL T1/E1/J1 LONG HAUL / SHORT HAUL TRANSCEIVER
The JTAG boundary scan registers include BSR (Boundary Scan
Output Enable
Select
MUX
August 20, 2009
TDO