SAA7146AH/V4,557 NXP Semiconductors, SAA7146AH/V4,557 Datasheet - Page 31

• Manufacturer Part Number: SAA7146AH/V4,557
• Description: IC VIDEO SPCI BRIDGE HP 160-QFP
• Manufacturer: NXP Semiconductors
• Type: Video Bridger

Specifications of SAA7146AH/V4,557

• Package / Case: 160-QFP
• Applications: DTV
• Mounting Type: Surface Mount
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• Mounting Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 568-1318; 935269343557; SAA7146AHBB

Philips Semiconductors
7.4.4.7
The INTERRUPT command will set the RPS_I bit of the
task in the Interrupt status register (see Table 41) if it is
executed and the condition described by the event flags is
true. The execution of RPS continues. The format of the
Interrupt command is shown in Tables 24 and 25.
The OAN bit specifies if the condition in bits 25 to 0 is an
AND (OAN set to 0) or if the condition is an OR (OAN set
to 1). If the INV bit is set this command will wait for the
condition to become false.
7.4.4.8
The STOP command will terminate the RPS execution and
reset the ERPS-bit. The command specific part of the
STOP command is like the INTERRUPT command. If the
addressed event is true the STOP will be executed
otherwise the execution will continue with the next
command. If no event is addressed the STOP will be
executed unconditionally. The format of the STOP
command is shown in Tables 26 and 27.
The OAN bit specifies if the condition in bits 25 to 0 is an
AND (OAN set to 0) or if the condition is an OR (OAN set
to 1). If the INV bit is set this command will wait for the
condition to become false.
2004 Aug 25
Multimedia bridge, high performance
Scaler and PCI circuit (SPCI)
INTERRUPT
STOP
31
7.4.4.9
The JUMP command is a two Dword command.
The second Dword contains the physical address at which
the RPS will continue its execution. The address in the
second Dword is directly transferred to the RPSAddr
Register. The command specific part in the first Dword of
the JUMP command is like the INTERRUPT command.
If the addressed event is true the JUMP will be performed
otherwise the execution will continue at the next
command. If no event is addressed the JUMP will be
unconditional. The format of the JUMP command is shown
in Tables 28 and 29.
The OAN bit specifies if the condition in bits 25 to 0 is an
AND (OAN set to 0) or if the condition is an OR (OAN set
to 1). If the INV bit is set this command will wait for the
condition to become false.
JUMP
Product specification
SAA7146A