SAA7146AH/V4,557 NXP Semiconductors, SAA7146AH/V4,557 Datasheet - Page 51

• Manufacturer Part Number: SAA7146AH/V4,557
• Description: IC VIDEO SPCI BRIDGE HP 160-QFP
• Manufacturer: NXP Semiconductors
• Type: Video Bridger

Specifications of SAA7146AH/V4,557

• Package / Case: 160-QFP
• Applications: DTV
• Mounting Type: Surface Mount
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• Mounting Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 568-1318; 935269343557; SAA7146AHBB

Philips Semiconductors
7.8.2
7.8.2.1
In this mode two video ports with YUV 4 : 2 : 2 sampling scheme are available. Each D1 port has an I/O capability and
has a separate clock input and separate sync lines. In this format the pixel rate is equivalent to the clock rate LLC.
The colour difference signal sample and luminance signal sample (straight binary) are byte-wise multiplexed into the
same 8-bit wide data stream, with sequence and timing in accordance with CCIR 656 recommendation (respectively
according to D1 for 60 Hz application). The incoming and scaled data are reformatted to 16-bit for the HPS data path and
the corresponding reference signals are generated. A discontinuous data stream is supported by accepting or generating
a pixel/byte qualifying signal (PXQ = 1: qualified pixel, PXQ = 0: invalid data, see Fig.8). The start condition for
synchronizing to the correct Cb-Y-Cr-Y sequence is given by the selected horizontal reference signal. The sequence
increments only with qualified bytes.
2004 Aug 25
handbook, full pagewidth
Multimedia bridge, high performance
Scaler and PCI circuit (SPCI)
D1_x (7 to 0)
PXQ_x
LLC_x
DD1: D
HS_x
Cb-Y-Cr-Y 8-bit wide stream
UAL
D1 (CCIR 656, SMPTE125M), I/O
Cb
Fig.8 Timing of PXQ_x for serial 8-bit data input at the D1_x port.
Y
Cr
51
Y
Cb
Y
Product specification
SAA7146A
MHB050