mc68hc912dg128 Freescale Semiconductor, Inc, mc68hc912dg128 Datasheet - Page 323

• Manufacturer Part Number: mc68hc912dg128
• Description: M68hc12 Microcontrollers
• Manufacturer: Freescale Semiconductor, Inc

17.6.1 Interrupt Acknowledge
17.6.2 Interrupt Vectors
MC68HC912DG128 — Rev 3.0
MOTOROLA
NOTE:
Interrupts are directly associated with one or more status flags in either
the msCAN12 receiver flag register (CRFLG) or the msCAN12
transmitter flag register (CTFLG). Interrupts are pending as long as one
of the corresponding flags is set. The flags in above registers must be
reset within the interrupt handler in order to handshake the interrupt. The
flags are reset through writing a 1 to the corresponding bit position. A flag
cannot be cleared if the respective condition still prevails.
Bit manipulation instructions (BSET) shall not be used to clear interrupt
flags.
The msCAN12 supports four interrupt vectors as shown in
The vector addresses and the relative interrupt priority are dependent on
the chip integration and to be defined.
Freescale Semiconductor, Inc.
For More Information On This Product,
– Receiver error passive: the receive error counter has
– Transmitter error passive: the transmit error counter has
– Bus off: the transmit error counter has exceeded 255 and
exceeded the error passive limit of 127 and msCAN12 has
gone to error passive state.
exceeded the error passive limit of 127 and msCAN12 has
gone to error passive state.
msCAN12 has gone to BUSOFF state.
Go to: www.freescale.com
MSCAN Controller
MSCAN Controller
Table
Technical Data
Interrupts
17-1.
323