tmp88fw45afg TOSHIBA Semiconductor CORPORATION, tmp88fw45afg Datasheet - Page 242

• Manufacturer Part Number: tmp88fw45afg
• Description: 8 Bit Microcontroller Tlcs-870/x Series
• Manufacturer: TOSHIBA Semiconductor CORPORATION

20.1
Flash Memory Control
20.1
Flash Memory Control Register
20.1.1
(01FFFH)
FLSCR
resister (FLSSTB).
The flash memory is controlled via the flash memory control register (FLSCR) and flash memory stanby control
Note 1: The command sequence of the flash memory can be executed only when FLSCR<FLSMD>="0011B". In other cases,
Note 2: FLSCR<FLSMD> must be set to either "1100B" or "0011B".
Note 3: Bits 3 to 0 in FLSCR register are always read as don’t care.
Flash Memory Control
ation. This write protection feature is realized by disabling flash memory command sequence execution via the
flash memory control register (write protect). To enable command sequence execution, set FLSCR<FLSMD> to
“0011B”. To disable command sequence execution, set FLSCR<FLSMD> to “1100B”. After reset,
FLSCR<FLSMD> is initialized to “1100B” to disable command sequence execution. Normally,
FLSCR<FLSMD> should be set to “1100B” except when the flash memory needs to be written or erased.
The flash memory can be protected from inadvertent write due to program error or microcontroller misoper-
Flash Memory Command Sequence Execution Control (FLSCR<FLSMD>)
FLSMD
7
any attempts to execute the command sequence are ineffective.
Flash memory command sequence exe-
cution control
6
FLSMD
5
4
Page 228
3
1100: Disable command sequence execution
0011: Enable command sequence execution
Others: Reserved
2
1
0
(Initial value : 1100 ****)
TMP88FW45AFG
R/W