tmp88fw45afg TOSHIBA Semiconductor CORPORATION, tmp88fw45afg Datasheet - Page 265

• Manufacturer Part Number: tmp88fw45afg
• Description: 8 Bit Microcontroller Tlcs-870/x Series
• Manufacturer: TOSHIBA Semiconductor CORPORATION

Note:“xxH × 3” indicates that the device enters the halt condition after sending 3 bytes of xxH. For details, refer to
Description of Product ID code output mode
"21.7 Error Code".
1. The 1st through 4th bytes of the transmitted and received data contain the same data as in the flash
2. The 5th byte of the received data contains the product ID code output mode command data (C0H).
3. When the 5th byte contains the operation command data shown in Table 21-6, the device echoes back
4. The 9th through 26th bytes contain the product ID code. For details, refer to "21.11 Product ID
5. After sending the checksum, the device waits for the next operation command data.
memory writing mode.
the value which is the same data in the 6th byte position of the received data (in this case, C0H). If the
5th byte data does not contain the operation command data, the device enters the halt condition after
sending 3 bytes of operation command error code (63H).
Code".
Page 251
TMP88FW45AFG