Z8F041APH020SG2156 ZiLOG, Z8F041APH020SG2156 Datasheet - Page 23

• Manufacturer Part Number: Z8F041APH020SG2156
• Description: 8-bit Microcontrollers - MCU 4K FLASH 1K RAM 128B NVDS
• Manufacturer: ZiLOG

Specifications of Z8F041APH020SG2156

• Rohs: yes
• Core: eZ8
• Processor Series: Z8F041xx
• Data Bus Width: 8 bit
• Maximum Clock Frequency: 20 MHz
• Program Memory Size: 4 KB
• Data Ram Size: 1 KB
• On-chip Adc: Yes
• Operating Supply Voltage: 2.7 V to 3.6 V
• Operating Temperature Range: - 40 C to + 105 C
• Package / Case: PDIP-20
• Mounting Style: Through Hole
• A/d Bit Size: 10 bit
• A/d Channels Available: 8
• Interface Type: UART
• Maximum Operating Temperature: + 105 C
• Minimum Operating Temperature: - 40 C
• Number Of Programmable I/os: 17
• Number Of Timers: 2
• Program Memory Type: Flash
• Supply Voltage - Max: 3.6 V
• Supply Voltage - Min: 2.7 V

PS022827-1212
Note:
General-Purpose Input/Output
Direct LED Drive
Flash Controller
Non-Volatile Data Storage
Interrupt Controller
Reset Controller
operate in ONE-SHOT, CONTINUOUS, GATED, CAPTURE, CAPTURE RESTART,
COMPARE, CAPTURE and COMPARE, PWM SINGLE OUTPUT and PWM DUAL
OUTPUT modes.
The Product Line MCUs feature 6 to 25 port pins (Ports A–D) for general- purpose input/
output (GPIO). The number of GPIO pins available is a function of package and each pin
is individually programmable. 5 V tolerant input pins are available on all 
I/Os on 8-pin devices and most I/Os on other package types.
The 20- and 28-pin devices support controlled current sinking output pins capable of driv-
ing LEDs without the need for a current limiting resistor. These LED drivers are indepen-
dently programmable to four different intensity levels.
The Flash Controller programs and erases Flash memory. The Flash Controller supports
several protection mechanisms against accidental program and erasure, plus factory serial-
ization and read protection.
The nonvolatile data storage (NVDS) uses a hybrid hardware/software scheme to imple-
ment a byte programmable data memory and is capable of over 100,000 write cycles.
Devices with 8 KB of Flash memory do not include the NVDS feature.
The Z8 Encore! XP F082A Series products support up to 20 interrupts. These interrupts
consist of 8 internal peripheral interrupts and 12 general-purpose I/O pin interrupt sources.
The interrupts have three levels of programmable interrupt priority.
The Z8 Encore! XP F082A Series products can be reset using the RESET pin, Power-On
Reset, Watchdog Timer (WDT) time-out, STOP Mode exit, or Voltage Brown-Out (VBO)
P R E L I M I N A R Y
Z8 Encore! XP
CPU and Peripheral Overview
Product Specification
®
F082A Series
6