DEMO9RS08KA2 Freescale Semiconductor, DEMO9RS08KA2 Datasheet - Page 48

• Manufacturer Part Number: DEMO9RS08KA2
• Description: DEMO BOARD FOR 9RS08KA2
• Manufacturer: Freescale Semiconductor
• Series: RS08r
• Type: MCUr

Specifications of DEMO9RS08KA2

• Contents: Board, Cable, CD, Documentation, Sample ICs
• Processor To Be Evaluated: RS08KA2
• Data Bus Width: 8 bit
• Interface Type: USB
• Silicon Manufacturer: Freescale
• Core Architecture: RS08
• Core Sub-architecture: RS08
• Silicon Core Number: MC9RS08
• Silicon Family Name: RS08KA
• Rohs Compliant: Yes
• For Use With/related Products: MC9RS08KA2
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Chapter 6 Parallel Input/Output Control
corresponding pulling device enable register bit. The pulling device is also disabled if the pin is controlled
by an analog function.
6.3.1.2
Pullup/pulldown control is used to select the pullup or pulldown device enabled by the corresponding
PTAPE bit.
6.3.1.3
Slew rate control can be enabled for each port pin by setting the corresponding bit in the slew rate control
register (PTASEn). When enabled, slew control limits the rate at which an output can transition in order to
reduce EMC emissions. Slew rate control has no effect on pins that are configured as inputs.
48
PTAPUD[5:4,2:0]
PTAPE[5:4,2:0]
Reset:
Reset:
5:4,2:0
5:4,2:0
Field
W
W
Field
R
R
0
Pullup/Pulldown Control
0
Output Slew Rate Control Enable
7
0
7
0
Internal Pulling Device Enable for Port A Bits — Each of these control bits determines whether the internal
pulling device is enabled for the associated PTA pin. For port A pins that are configured as outputs, these bits
have no effect and the internal pullup devices are disabled.
0 Internal pulling device disabled for port A bit n.
1 Internal pulling device enabled for port A bit n.
Pullup/Pulldown Device Control for Port A Bits — Each of these control bits determines whether the
internal pullup or pulldown device is selected for the associated PTA pin. The actual pullup/pulldown device
is only enabled by enabling the associated PTAPE bit.
0 Internal pullup device is selected for port A bit n.
1 Internal pulldown device is selected for port A bit n.
Figure 6-4. Internal Pulling Device Enable for Port A Register (PTAPE)
Figure 6-5. Pullup/Pulldown Device Control for Port A (PTAPUD)
0
0
0
0
6
6
Table 6-4. PTAPUD Register Field Descriptions
Table 6-3. PTAPE Register Field Descriptions
PTAPUD5
PTAPE5
MC9RS08KA2 Series Data Sheet, Rev. 4
0
0
5
5
PTAPUD4
PTAPE4
0
0
4
4
Description
Description
3
0
0
3
0
0
PTAPUD2
PTAPE2
0
0
2
2
PTAPUD1
PTAPE1
Freescale Semiconductor
0
0
1
1
PTAPUD0
PTAPE0
0
0
0
0