D13007VX13V Renesas Electronics America, D13007VX13V Datasheet - Page 475

• Manufacturer Part Number: D13007VX13V
• Description: MCU 3V 0K 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300Hr

Specifications of D13007VX13V

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 13MHz
• Connectivity: SCI, SmartCard
• Peripherals: DMA, PWM, WDT
• Number Of I /o: 35
• Program Memory Type: ROMless
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -

For serial communication interface (SMIF bit in SCMR cleared to 0): Indicates that when the
last bit of a serial character was transmitted TDR did not contain valid transmit data, so
transmission has ended. The TEND flag is a read-only bit and cannot be written.
Bit 2
TEND
0
1
For smart card interface (SMIF bit in SCMR set to 1): Indicates that when the last bit of a
serial character was transmitted TDR did not contain valid transmit data, so transmission has
ended. The TEND flag is a read-only bit and cannot be written.
Bit 2
TEND
0
1
Note: etu: Elementary time unit (time required to transmit one bit)
Description
Transmission is in progress
[Clearing conditions]
•
•
End of transmission
[Setting conditions]
•
•
•
Description
Transmission is in progress
[Clearing conditions]
•
•
End of transmission
[Setting conditions]
•
•
•
Read TDRE when TDRE = 1, then write 0 in TDRE
The DMAC writes data in TDR
The chip is reset or enters standby mode
The TE bit in SCR is cleared to 0
TDRE is 1 when the last bit of a 1-byte serial transmit character is
transmitted
Read TDRE when TDRE = 1, then write 0 in TDRE
The DMAC writes data in TDR
The chip is reset or enters standby mode
The TE bit is cleared to 0 in SCR and the FER/ERS bit is also cleared to 0
TDRE is 1 and FER/ERS is 0 (normal transmission) 2.5 etu (when GM = 0)
or 1.0 etu (when GM = 1) after a 1-byte serial character is transmitted
Rev.5.00 Sep. 12, 2007 Page 445 of 764
13. Serial Communication Interface
REJ09B0396-0500
(Initial value)
(Initial value)