D13007VX13V Renesas Electronics America, D13007VX13V Datasheet - Page 525

• Manufacturer Part Number: D13007VX13V
• Description: MCU 3V 0K 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300Hr

Specifications of D13007VX13V

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 13MHz
• Connectivity: SCI, SmartCard
• Peripherals: DMA, PWM, WDT
• Number Of I /o: 35
• Program Memory Type: ROMless
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -

Bits 1 and 0⎯Clock Enable 1 and 0 (CKE1, CKE0): These bits select the SCI clock source and
enable or disable clock output from the SCK pin. In smart card interface mode, it is possible to
specify a fixed high level or fixed low level for the clock output, in addition to the usual switching
between enabling and disabling of the clock output.
Bit 7
GM
0
1
14.3
14.3.1
The main features of the smart card interface are as follows.
• One frame consists of 8-bit data plus a parity bit.
• In transmission, a guard time of at least 2 etu (elementary time units: the time for transfer of
• If a parity error is detected during reception, a low error signal level is output for a1 etu period
• If an error signal is detected during transmission, the same data is transmitted automatically
• Only asynchronous communication is supported; there is no synchronous communication
14.3.2
Figure 14.2 shows a pin connection diagram for the smart card interface.
In communication with a smart card, since both transmission and reception are carried out on a
single data transmission line, the TxD pin and RxD pin should both be connected to this line. The
data transmission line should be pulled up to V
one bit) is provided between the end of the parity bit and the start of the next frame.
10.5 etu after the start bit.
after the elapse of 2 etu or longer.
function.
Operation
Overview
Pin Connections
Bit 1
CKE1
0
1
Bit 0
CKE0
0
1
0
1
0
1
Description
Internal clock/SCK pin is I/O port
Internal clock/SCK pin is clock output
Internal clock/SCK pin is fixed at low output
Internal clock/SCK pin is clock output
Internal clock/SCK pin is fixed at high output
Internal clock/SCK pin is clock output
CC
with a resistor.
Rev.5.00 Sep. 12, 2007 Page 495 of 764
14. Smart Card Interface
REJ09B0396-0500
(Initial value)