HD64F2166VTE33 Renesas Electronics America, HD64F2166VTE33 Datasheet - Page 390

• Manufacturer Part Number: HD64F2166VTE33
• Description: IC H8S MCU FLASH 512K 144-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2100r

Specifications of HD64F2166VTE33

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 33MHz
• Connectivity: I²C, IrDA, LPC, SCI, SmartCard
• Peripherals: POR, PWM, WDT
• Number Of I /o: 106
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 40K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 144-TQFP, 144-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

13.6
13.6.1
The watchdog timer’s registers, TCNT and TCSR differ from other registers in being more
difficult to write to. The procedures for writing to and reading from these registers are given
below.
Writing to TCNT and TCSR (Example of WDT_0):
These registers must be written to by a word transfer instruction. They cannot be written to by a
byte transfer instruction.
TCNT and TCSR both have the same write address. Therefore, satisfy the relative condition
shown in figure 13.6 to write to TCNT or TCSR. To write to TCNT, the higher bytes must contain
the value H'5A and the lower bytes must contain the write data. To write to TCSR, the higher
bytes must contain the value H'A5 and the lower bytes must contain the write data.
Reading from TCNT and TCSR (Example of WDT_0):
These registers are read in the same way as other registers. The read address is H'FFA8 for TCSR
and H'FFA9 for TCNT.
Rev. 3.00, 03/04, page 348 of 830
<TCSR write>
<TCNT write>
Usage Notes
Notes on Register Access
Address : H'FFA8
Address : H'FFA8
Figure 13.6 Writing to TCNT and TCSR (WDT_0)
15
15
H'5A
H'A5
8 7
8 7
Write data
Write data
0
0