UPD78F1201MC-CAB-AX Renesas Electronics America, UPD78F1201MC-CAB-AX Datasheet - Page 74

• Manufacturer Part Number: UPD78F1201MC-CAB-AX
• Description: MCU 16BIT 78K0R/LX3 30-SSOP
• Manufacturer: Renesas Electronics America
• Series: 78K0R/Ix3r

Specifications of UPD78F1201MC-CAB-AX

• Core Processor: 78K/0R
• Core Size: 16-Bit
• Speed: 40MHz
• Connectivity: 3-Wire SIO, I²C, LIN, UART/USART
• Peripherals: DMA, LVD, POR, PWM, WDT
• Number Of I /o: 21
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 6x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

2.2.9 P80 to P83 (port 8)
input voltages on the (−) side of comparators 0 and 1, timer pin Hi-Z control inputs, external interrupt request inputs,
and programmable gain amplifier inputs.
(1) Port mode
(2) Control mode
72
P80/CMP0P/
TMOFF0/
INTP3/PGAI
P81/CMP0M
P82/CMP1P/
TMOFF1/INTP7
P83/CMP1M
P80 to P83 function as I/O port. These pins also function as input voltages on the (+) side of comparators 0 and 1,
Inputs to the P80 to P83 pins must be enabled or disabled in 1-bit units using port input mode register 8 (PIM8).
The following operation modes can be specified in 1-bit units.
(b) CMP0M, CMP1M
(c) TMOFF0, TMOFF1
(f) TxD0
(g) RxD0
(h) INTP4 to INTP6
P80 to P83 function as I/O port. P80 to P83 can be set to input port or output port in 1-bit units using port mode
register 8 (PM8).
P80 to P83 function as input voltages on the (+) side of comparators 0 and 1, input voltages on the (−) side of
comparators 0 and 1, timer pin Hi-Z control inputs, external interrupt request inputs, and programmable gain
amplifier inputs.
(a) CMP0P, CMP1P
This is a serial data output pin of serial interface UART0.
This is a serial data input pin of serial interface UART0.
These are the external interrupt request input pin for which the valid edge (rising edge, falling edge, or both
rising and falling edges) can be specified.
These are the input voltage pins on the (+) sides of comparators 0 and 1.
These are the input voltage pins on the (−) sides of comparators 0 and 1.
These are the timer output pin (TO02 to TO07) Hi-Z control input pins.
78K0R/IB3
−
√
√
√
(38-pin)
√
√
√
√
CHAPTER 2 PIN FUNCTIONS
User’s Manual U19678EJ1V1UD
78K0R/IC3
(44-pin)
√
√
√
√
(48-pin)
√
√
√
√
78K0R/ID3
√
√
√
√
78K0R/IE3
√
√
√
√