UPD70F3737GC-UEU-AX Renesas Electronics America, UPD70F3737GC-UEU-AX Datasheet - Page 775

• Manufacturer Part Number: UPD70F3737GC-UEU-AX
• Description: MCU 32BIT V850ES/JX3-L 100-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Jx3-Lr

Specifications of UPD70F3737GC-UEU-AX

• Package / Case: *
• Voltage - Supply (vcc/vdd): 2.2 V ~ 3.6 V
• Operating Temperature: -40°C ~ 85°C
• Speed: 20MHz
• Number Of I /o: 84
• Core Processor: RISC
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Program Memory Size: 128KB (128K x 8)
• Data Converters: A/D 12x10b, D/A 2x8b
• Oscillator Type: Internal
• Peripherals: DMA, LVD, PWM, WDT
• Connectivity: CSI, EBI/EMI, I²C, UART/USART
• Core Size: 32-Bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

28.5.6 Internal resources used
used freely for purposes other than self programming.
Stack area
Library code
Application program
Maskable interrupt
NMI interrupt
The following table lists the internal resources used for self programming. These internal resources can also be
Note About resources used, refer to the Flash Memory Self-Programming Library User’s Manual.
Resource Name
Note
An extension of the stack used by the user is used by the library (can be used in both the
Can be used in the user application execution status or self-programming status. To use
Can be used in the user application execution status or self-programming status. To use
internal RAM and external RAM).
Program entity of library (can be used anywhere other than the flash memory block to be
manipulated).
Executed as user application.
Calls flash functions.
this interrupt in the self-programming status, since the processing transits to the address
of the internal RAM start address + 4 addresses, allocate the jump instruction that
transits the processing to the user interrupt servicing at the address of the internal RAM
start address + 4 addresses in advance.
this interrupt in the self-programming status, since the processing transits to the address
of the internal RAM start address, allocate the jump instruction that transits the
processing to the user interrupt servicing at the internal RAM start address in advance.
Table 28-11. Internal Resources Used
Preliminary User’s Manual U18953EJ1V0UD
CHAPTER 28 FLASH MEMORY
Description
775