UPD70F3737GC-UEU-AX Renesas Electronics America, UPD70F3737GC-UEU-AX Datasheet - Page 782

• Manufacturer Part Number: UPD70F3737GC-UEU-AX
• Description: MCU 32BIT V850ES/JX3-L 100-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Jx3-Lr

Specifications of UPD70F3737GC-UEU-AX

• Package / Case: *
• Voltage - Supply (vcc/vdd): 2.2 V ~ 3.6 V
• Operating Temperature: -40°C ~ 85°C
• Speed: 20MHz
• Number Of I /o: 84
• Core Processor: RISC
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Program Memory Size: 128KB (128K x 8)
• Data Converters: A/D 12x10b, D/A 2x8b
• Oscillator Type: Internal
• Peripherals: DMA, LVD, PWM, WDT
• Connectivity: CSI, EBI/EMI, I²C, UART/USART
• Core Size: 32-Bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

29.1.6 Cautions
782
(1) If a reset signal is input (from the target system or a reset signal from an internal reset source) during RUN
(2) Even if the reset signal is masked by the mask function, the I/O buffer (port pin) may be reset if a reset signal
(3) Pin reset during a break is masked and the CPU and peripheral I/O are not reset. If pin reset or internal reset
(4) In the on-chip debug mode, the DDO pin is forcibly set to the high-level output.
(5) On-chip debugging can be used when the supply voltage (V
(6) In the on-chip debug mode, the output voltage of the regulator does not decrease even in the low-voltage
(program execution), the break function may malfunction.
is input from a pin.
is generated as soon as the flash memory is rewritten by DMM or read by the RAM monitor function while the
user program is being executed, the CPU and peripheral I/O may not be correctly reset.
at less than 2.7 V.
STOP mode, low-voltage subclock operation mode, or low-voltage sub-IDLE mode
CHAPTER 29 ON-CHIP DEBUG FUNCTION
Preliminary User’s Manual U18953EJ1V0UD
DD
) is in a range of 2.7 to 3.6 V. It cannot be used