UPD70F3763GC-UEU-AX Renesas Electronics America, UPD70F3763GC-UEU-AX Datasheet - Page 1139

• Manufacturer Part Number: UPD70F3763GC-UEU-AX
• Description: MCU 32BIT V850ES/JX3-U 100-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Jx3-Ur

Specifications of UPD70F3763GC-UEU-AX

• Core Processor: RISC
• Core Size: 32-Bit
• Speed: 48MHz
• Connectivity: CSI, EBI/EMI, I²C, UART/USART, USB
• Peripherals: DMA, LVD, PWM, WDT
• Number Of I /o: 75
• Program Memory Size: 384KB (384K x 8)
• Program Memory Type: FLASH
• Ram Size: 48K x 8
• Voltage - Supply (vcc/vdd): 2.85 V ~ 3.6 V
• Data Converters: A/D 12x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

V850ES/JG3-U, V850ES/JH3-U
R01UH0043EJ0300 Rev.3.00
Sep 30, 2010
15
14 to 2
1
0
Bit position R/W
R
W
R
W
−
−
DRWE
SRWE
OCI
LPS
CGP
Bit name
−
Device Remote Wakeup Enable
Sets whether the connect status change is included in remote wakeup events.
If a connect status change event occurs while this bit is set (1), the state changes
from USB Suspend to USB Resume, and a Resume Detected interrupt occurs.
Set Remote Wakeup Enable
Sets the DRWE bit to 1.
Writing “1” to this bit sets the DRWE bit to “1”. Writing “0” to this bit is ignored.
Reserved. (Be sure to write “0” to these bits.)
Overcurrent Indicator
Reports the overcurrent state in global overcurrent detection mode.
This bit is fixed to “0” when overcurrent is reported in port units.
This bit is read-only.
Local Power Status
This bit is fixed to “0” because the local power status is not supported.
Clear Global Power
Used to turn off power for all ports in global power mode.
Setting this bit to “1” turns off power to all ports.
When the PSM bit of the HcRhDescriptorA register is set to “1”, power is turned off to
ports with which the PPCM field is cleared (0).
1: The connect status change is a remote wakeup source.
0: The connect status change is not a remote wakeup source.
1: Ports are in the overcurrent state.
0: Ports are in the normal state.
CHAPTER 21 USB HOST CONTROLLER (USBH)
Function
Page 1139 of 1408