HD64F3048BF25 Renesas Electronics America, HD64F3048BF25 Datasheet - Page 218

• Manufacturer Part Number: HD64F3048BF25
• Description: IC H8 MCU FLASH 128K 100QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300Hr

Specifications of HD64F3048BF25

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 8MHz
• Connectivity: SCI, SmartCard
• Peripherals: DMA, PWM, WDT
• Number Of I /o: 70
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Section 7 Refresh Controller
7.3.4
To use the refresh controller as an interval timer, clear the PSRAME and DRAME both to 0. After
setting RTCOR, select a clock source with bits CKS2 to CKS0 in RTMCSR, and set the CMIE bit
to 1.
Timing of Setting of Compare Match Flag and Clearing by Compare Match
The CMF flag in RTCSR is set to 1 by a compare match signal output when the RTCOR and
RTCNT values match. The compare match signal is generated in the last state in which the values
match (when RTCNT is updated from the matching value to a new value). Accordingly, when
RTCNT and RTCOR match, the compare match signal is not generated until the next counter
clock pulse. Figure 7.19 shows the timing.
Operation in Power-Down State
The interval timer function operates in sleep mode. It does not operate in hardware standby mode.
In software standby mode RTCNT and RTMCSR bits 7 and 6 are initialized, but RTMCSR bits 5
to 3 and RTCOR retain their settings prior to the transition to software standby mode.
Rev. 3.00 Sep 27, 2006 page 190 of 872
REJ09B0325-0300
RTCNT
RTCOR
Compare
match signal
CMF flag
Interval Timer
Figure 7.19 Timing of Setting of CMF Flag
N
N
H'00