PIC24FJ16MC102-I/SP Microchip Technology, PIC24FJ16MC102-I/SP Datasheet - Page 134

• Manufacturer Part Number: PIC24FJ16MC102-I/SP
• Description: 16-bit Motor Control Family, 16 MIPS, 16KB Flash, 1KB RAM 28 SPDIP .300in TUBE
• Manufacturer: Microchip Technology
• Series: PIC® 24Fr

Specifications of PIC24FJ16MC102-I/SP

• Featured Product: PIC24FJ/33FJ MCUs & dsPIC® DSCs
• Core Processor: PIC
• Core Size: 16-Bit
• Speed: 16 MIPs
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, Motor Control PWM, POR, PWM, WDT
• Number Of I /o: 21
• Program Memory Size: 16KB (5.5K x 24)
• Program Memory Type: FLASH
• Eeprom Size: -
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 6x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-DIP (0.300", 7.62mm)
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

PIC24FJ16MC101/102
14.1
Configure the Output Compare modes by setting the
appropriate Output Compare Mode bits (OCM<2:0>) in
the Output Compare Control register (OCxCON<2:0>).
Table 14-1
Compare modes.
compare operation for various modes. The user
TABLE 14-1:
FIGURE 14-2:
DS39997B-page 134
OCM<2:0>
Continuous Pulse Mode
000
001
010
011
100
101
110
111
Active-High One-Shot
Active-Low One-Shot
(OCM = 110 or 111)
Delayed One-Shot
Output Compare Modes
lists the different bit settings for the Output
(OCM = 011)
(OCM = 100)
Toggle Mode
(OCM = 101)
(OCM = 001)
(OCM = 010)
PWM Mode
Module Disabled
Active-Low One-Shot
Active-High One-Shot
Toggle Mode
Delayed One-Shot
Continuous Pulse mode
PWM mode without fault
protection
PWM mode with fault protection 0, if OCxR is zero
OUTPUT COMPARE MODES
TMRy
Figure 14-2
OUTPUT COMPARE OPERATION
OCxRS
OCxR
Mode
Output Compare
Mode enabled
illustrates the output
Current output is maintained
0, if OCxR is zero
1, if OCxR is non-zero
1, if OCxR is non-zero
Controlled by GPIO register
Preliminary
OCx Pin Initial State
Timer is reset on
period match
0
1
0
0
application must disable the associated timer when
writing to the output compare control registers to avoid
malfunctions.
Note:
See Section 16. “Output Compare”
(DS39706) in the “PIC24F Family Refer-
ence Manual” (DS70209) for OCxR and
OCxRS register restrictions.
OCx Rising edge
OCx Falling edge
OCx Rising and Falling edge
OCx Falling edge
OCx Falling edge
No interrupt
OCFA Falling edge for OC1 to OC4
OCx Interrupt Generation
© 2011 Microchip Technology Inc.
—