PIC24FJ16MC102-I/SP Microchip Technology, PIC24FJ16MC102-I/SP Datasheet - Page 185

• Manufacturer Part Number: PIC24FJ16MC102-I/SP
• Description: 16-bit Motor Control Family, 16 MIPS, 16KB Flash, 1KB RAM 28 SPDIP .300in TUBE
• Manufacturer: Microchip Technology
• Series: PIC® 24Fr

Specifications of PIC24FJ16MC102-I/SP

• Featured Product: PIC24FJ/33FJ MCUs & dsPIC® DSCs
• Core Processor: PIC
• Core Size: 16-Bit
• Speed: 16 MIPs
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, Motor Control PWM, POR, PWM, WDT
• Number Of I /o: 21
• Program Memory Size: 16KB (5.5K x 24)
• Program Memory Type: FLASH
• Eeprom Size: -
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 6x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-DIP (0.300", 7.62mm)
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

20.0
© 2011 Microchip Technology Inc.
Note 1: This data sheet summarizes the features
2: It
3: Some registers and associated bits
COMPARATOR MODULE
of the PIC24FJ16MC101/102 families of
devices. It is not intended to be a
comprehensive reference source. To
complement the information in this data
sheet, refer to Section 48. “Comparator
with
“PIC24F Family Reference Manual”,
which is available from the Microchip
website (www.microchip.com).
specifications in
cal Characteristics”
supercede any specifications that may be
provided in PIC24F Family Reference
Manual sections.
described in this section may not be
available on all devices. Refer to
Section 4.0 “Memory Organization”
this data sheet for device-specific register
and bit information.
is
Blanking”
important
Section 26.0 “Electri-
(DS39741)
to
of this data sheet,
note
that
of
the
the
Preliminary
in
The PIC24FJ16MC101/102 Comparator module pro-
vides three comparators that can be configured in dif-
ferent ways. As shown in
comparator options are specified by the Comparator
module’s Special Function Register (SFR) control bits.
These options allow users to:
• Select the edge for trigger and interrupt generation
• Select low-power control
• Configure the comparator voltage reference and
• Configure output blanking and masking
The comparator operating mode is determined by the
input selections (i.e., whether the input voltage is
compared to a second input voltage, to an internal
voltage reference.
band gap
PIC24FJ16MC101/102
Figure
DS39997B-page 185
20-1, individual