PIC24FJ16MC102-I/SP Microchip Technology, PIC24FJ16MC102-I/SP Datasheet - Page 167

• Manufacturer Part Number: PIC24FJ16MC102-I/SP
• Description: 16-bit Motor Control Family, 16 MIPS, 16KB Flash, 1KB RAM 28 SPDIP .300in TUBE
• Manufacturer: Microchip Technology
• Series: PIC® 24Fr

Specifications of PIC24FJ16MC102-I/SP

• Featured Product: PIC24FJ/33FJ MCUs & dsPIC® DSCs
• Core Processor: PIC
• Core Size: 16-Bit
• Speed: 16 MIPs
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, Motor Control PWM, POR, PWM, WDT
• Number Of I /o: 21
• Program Memory Size: 16KB (5.5K x 24)
• Program Memory Type: FLASH
• Eeprom Size: -
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 6x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-DIP (0.300", 7.62mm)
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

18.0
The Universal Asynchronous Receiver Transmitter
(UART) module is one of the serial I/O modules
available in the PIC24FJ16MC101/102 device family.
The UART is a full-duplex asynchronous system that
can communicate with peripheral devices, such as
personal computers, LIN 2.0, and RS-232, and RS-485
interfaces. The module also supports a hardware flow
control option with the UxCTS and UxRTS pins and
also includes an IrDA
FIGURE 18-1:
© 2011 Microchip Technology Inc.
Note 1: This data sheet summarizes the features
2: It
3: Some registers and associated bits
UNIVERSAL ASYNCHRONOUS
RECEIVER TRANSMITTER
(UART)
of the PIC24FJ16MC101/102 family of
devices. It is not intended to be a
comprehensive reference source. To
complement the information in this data
sheet, refer to Section 21. “UART”
(DS39708)
Reference Manual”, which is available
from
(www.microchip.com).
specifications in
cal Characteristics”
supercede any specifications that may be
provided in PIC24F Family Reference
Manual sections.
described in this section may not be
available on all devices. Refer to
Section 4.0 “Memory Organization”
this data sheet for device-specific register
and bit information.
is
important
the
®
UART SIMPLIFIED BLOCK DIAGRAM
encoder and decoder.
in
Microchip
the
Section 26.0 “Electri-
Hardware Flow Control
Baud Rate Generator
to
UART Transmitter
UART Receiver
of this data sheet,
“PIC24F
note
IrDA
web
®
that
Family
site
the
Preliminary
in
The primary features of the UART module are:
• Full-Duplex, 8-bit or 9-bit Data Transmission
• Even, Odd, or No Parity Options (for 8-bit data)
• One or two stop bits
• Hardware flow control option with UxCTS and
• Fully integrated Baud Rate Generator with 16-bit
• Baud rates ranging from 0.4 Mbps to 6 bps at 16x
• Baud rates ranging from 1.6 Mbps to 24.4 bps at 4x
• 4-deep First-In First-Out (FIFO) Transmit Data
• 4-deep FIFO Receive Data buffer
• Parity, framing and buffer overrun error detection
• Support for 9-bit mode with Address Detect
• Transmit and Receive interrupts
• A separate interrupt for all UART error conditions
• Loopback mode for diagnostic support
• Support for sync and break characters
• Support for automatic baud rate detection
• IrDA
• 16x baud clock output for IrDA
A simplified block diagram of the UART module is
shown in
these key hardware elements:
• Baud Rate Generator
• Asynchronous Transmitter
• Asynchronous Receiver
through the UxTX and UxRX pins
UxRTS pins
prescaler
mode at 16 MIPS
mode at 16 MIPS
buffer
(9th bit = 1)
®
PIC24FJ16MC101/102
encoder and decoder logic
Figure
18-1. The UART module consists of
UxRTS/BCLK
UxCTS
UxRX
UxTX
®
support
DS39997B-page 167