MC68MH360ZP33L Freescale Semiconductor, MC68MH360ZP33L Datasheet - Page 404

• Manufacturer Part Number: MC68MH360ZP33L
• Description: IC MPU 32BIT QUICC 357-PBGA
• Manufacturer: Freescale Semiconductor

Specifications of MC68MH360ZP33L

• Processor Type: M683xx 32-Bit
• Speed: 33MHz
• Voltage: 5V
• Mounting Type: Surface Mount
• Package / Case: 357-PBGA
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Features: -

Serial Interface with Time Slot Assigner
RFSDx—Receive Frame Sync Delay for TDM A or B
DSCx—Double-Speed Clock for TDM A or B
CRTx—Common Receive and Transmit Pins for TDM A or B
STZx—Set L1TXDx to Zero for TDM A or B
CEx—Clock Edge for TDM A or B
7-80
These two bits determine the number of clock delays between the receive sync and the
first bit of the receive frame. Even if the CRTx bit is set, these bits do not control the delay
for the transmit frame.
Refer to Figure 7-29 and Figure 7-30 for an example of the use of these bits.
Some TDMs such as GCI define the input clock to be 2 faster than the data rate. This bit
controls this option.
This bit is useful when the transmit and receive sections of a given TDM use the same
clock and sync signals. In this mode, L1TCLKx and L1TSYNCx pins can be used as gen-
eral-purpose I/O pins.
00 = No bit delay (The first bit of the frame is transmitted/received on the same clock
01 = 1-bit delay (Use for IDL.)
10 = 2-bit delay
11 = 3-bit delay
0 = The channel clock (L1RCLKx and/or L1TCLKx) is equal to the data clock. (Use for
1 = The channel clock rate is twice the data rate. (Use for GCI.)
0 = Separate pins. The receive section of this TDM uses L1RCLKx and L1RSYNCx
1 = Common pins. The receive and transmit sections of this TDM use L1RCLKx as
0 = Normal operation.
1 = L1TXDx is set to zero until serial clocks are available, which is useful for GCI acti-
When DSCx =0
0 = The data is transmitted on the rising edge of the clock and received on the falling
1 = The data is transmitted on the falling edge of the clock and received on the rising
When DSCx = 1
0 = The data is transmitted on the rising edge of the clock and received on the rising
1 = The data is transmitted on the falling edge of the clock and received on the falling
IDL and most TDM formats.)
pins for framing, and the transmit section uses L1TCLKx and L1TSYNCx for fram-
ing.
clock pin of channel x and L1RSYNCx as the receive and transmit sync pin. (Use
for IDL and GCI.)
vation. Refer to 7.8.7.1 SI GCI Activation/Deactivation Procedure.
edge. (Use for IDL and GCI.)
edge.
edge. (Use for IDL and GCI.)
edge.
as the sync; use for GCI.)
Freescale Semiconductor, Inc.
For More Information On This Product,
MC68360 USER’S MANUAL
Go to: www.freescale.com
MOTOROLA