MC68MH360ZP33L Freescale Semiconductor, MC68MH360ZP33L Datasheet - Page 666

• Manufacturer Part Number: MC68MH360ZP33L
• Description: IC MPU 32BIT QUICC 357-PBGA
• Manufacturer: Freescale Semiconductor

Specifications of MC68MH360ZP33L

• Processor Type: M683xx 32-Bit
• Speed: 33MHz
• Voltage: 5V
• Mounting Type: Surface Mount
• Package / Case: 357-PBGA
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Features: -

Parallel Interface Port (PIP)
BSY—Busy condition
CHR—Character Received/Transmitted
BD—Rx/Tx Buffer
A complete buffer has been received/transmitted on the PIP channel. The channel closes
the receive buffer due to one of the following events:
7.13.7.6 PIP MASK REGISTER (PIPM). The PIPM is an 8-bit read-write register. It shares
the same address as the SMC2 mask register; thus, SMC2 cannot be used simultaneously
with the PIP. Each bit in the PIPM corresponds a bit in the PIPE. If a bit in the PIPM is a one,
the corresponding interrupt in the PIPE will be enabled. If the bit is a zero, the corresponding
interrupt in the PIPE will be masked. This register is cleared at reset.
7.13.8 Centronics Controller Overview
Centronics is a parallel peripheral interface bus that is generally used as a communication
channel between a host computer and printing equipment. The interface uses an 8 bit data
bus, handshake signals that control the data exchange, and some status lines that reflect
the peripheral device status. Traditionally, the direction of data transfer is from the host com-
puter to the peripheral device. New standards, such as IEEE P1284, allow reverse channel
operation (i.e data can be transferred from the peripheral to the host.)
7-342
A data byte/word was not received/transmitted by the PIP due to lack of buffers.
A data character was transmitted or received. This event may be used to generate inter-
rupts to the CPU32+ core if the PIP was programmed to be controlled by host software.
• Reception of a user-defined control character (and reject (R) = 0 for that character in
• Data length termination (the receive buffer was filled, or the transmit buffer has finished
• Reception of a programmable silence period.
the Centronics control characters table).
transmitting).
Freescale Semiconductor, Inc.
For More Information On This Product,
MC68360 USER’S MANUAL
Go to: www.freescale.com
MOTOROLA