AMD-K6 AMD [Advanced Micro Devices], AMD-K6 Datasheet - Page 241

• Manufacturer Part Number: AMD-K6
• Description: AMD-K6 Processor
• Manufacturer: AMD [Advanced Micro Devices]

20695H/0—March 1998
12
Chapter 12
Clock Control
The AMD-K6 processor supports five modes of clock control.
The processor can transition between these modes to maximize
performance, to minimize power dissipation, or to provide a
balance between performance and power. (See “Power
Dissipation” on page 235 for the maximum power dissipation of
the AMD-K6 processor within the normal and reduced-power
states.)
The five clock-control states supported are as follows:
The following sections describe each of the four low-power
states. Figure 78 on page 228 illustrates the clock control state
transitions.
Normal State: The processor is running in Real Mode,
Virtual-8086 Mode, Protected Mode, or System Management
Mode (SMM). In this state, all clocks are running—including
the external bus clock CLK and the internal processor
clock—and the full features and functions of the processor
are available.
Halt State: This low-power state is entered following the
successful execution of the HLT instruction. During this
state, the internal processor clock is stopped.
Stop Grant State: This low-power state is entered following
the recognition of the assertion of the STPCLK# signal.
During this state, the internal processor clock is stopped.
Stop Grant Inquire State: This state is entered from the Halt
state and the Stop Grant state as the result of a
system-initiated inquire cycle.
Stop Clock State: This low-power state is entered from the
Stop Grant state when the CLK signal is stopped.
Clock Control
AMD-K6
®
Processor Data Sheet
223