HD6413008F RENESAS [Renesas Technology Corp], HD6413008F Datasheet - Page 305

• Manufacturer Part Number: HD6413008F
• Description: Renesas 16-Bit Single-Chip Microcomputer H8 Family/H8/300H Series
• Manufacturer: RENESAS [Renesas Technology Corp]

9.4
9.4.1
8TCNT is incremented by input clock pulses (either internal or external).
Internal Clock: Three different internal clock signals (φ/8, φ/64, or φ/8192) divided from the
system clock (φ) can be selected, by setting bits CKS2 to CKS0 in 8TCR. Figure 9.8 shows the
count timing.
External Clock: Three incrementation methods can be selected by setting bits CKS2 to CKS0 in
8TCR: on the rising edge, the falling edge, and both rising and falling edges.
The pulse width of the external clock signal must be at least 1.5 system clocks when a single edge
is selected, and at least 2.5 system clocks when both edges are selected. Shorter pulses will not be
counted correctly.
Figure 9.9 shows the timing for incrementation on both edges of the external clock signal.
Note: Even if the same internal clock is selected for the 16-bit timer and the 8-bit timer, the same operation
8TCNT input clock
Internal clock
will not be performed since the incrementing edge is different in each case.
Operation
8TCNT Count Timing
8TCNT
φ
Figure 9.8 Count Timing for Internal Clock Input
N − 1
N
Rev.4.00 Aug. 20, 2007 Page 261 of 638
REJ09B0395-0400
9. 8-Bit Timers
N + 1