HD6413008F RENESAS [Renesas Technology Corp], HD6413008F Datasheet - Page 360

• Manufacturer Part Number: HD6413008F
• Description: Renesas 16-Bit Single-Chip Microcomputer H8 Family/H8/300H Series
• Manufacturer: RENESAS [Renesas Technology Corp]

11. Watchdog Timer
Writing to RSTCSR: RSTCSR must be written by a word transfer instruction. It cannot be
written by byte transfer instructions. Figure 11.3 shows the format of data written to RSTCSR. To
write 0 in the WRST bit, the write data must have H'A5 in the upper byte and H'00 in the lower
byte. The data (H'00) in the lower byte is written to RSTCSR, clearing the WRST bit to 0. To
write to the RSTOE bit, the upper byte must contain H'5A and the lower byte must contain the
write data. Writing this word transfers a write data value into the RSTOE bit.
Reading TCNT, TCSR, and RSTCSR: For reads of TCNT, TCSR, and RSTCSR, address
H'FFF8C is assigned to TCSR, address H'FFF8D to TCNT, and address H'FFF8F to RSTCSR.
These registers are therefore read like other registers. Byte transfer instructions can be used for
reading. Table 11.3 lists the read addresses of TCNT, TCSR, and RSTCSR.
Table 11.3 Read Addresses of TCNT, TCSR, and RSTCSR
Address*
H'FFF8C
H'FFF8D
H'FFF8F
Note:
Rev.4.00 Aug. 20, 2007 Page 316 of 638
REJ09B0395-0400
* Lower 20 bits of the address in advanced mode.
Writing 0 in WRST bit
Writing to RSTOE bit
Note:
Address
Address
*
Lower 20 bits of the address in advanced mode.
Figure 11.3 Format of Data Written to RSTCSR
H'FFF8E*
H'FFF8E*
Register
TCSR
TCNT
RSTCSR
15
15
H'A5
H'5A
8 7
8 7
Write data
H'00
0
0