MC56F8122VFAE Freescale Semiconductor, MC56F8122VFAE Datasheet - Page 56

• Manufacturer Part Number: MC56F8122VFAE
• Description: IC DSP 16BIT 40MHZ 48-LQFP
• Manufacturer: Freescale Semiconductor
• Series: 56F8xxxr

Specifications of MC56F8122VFAE

• Core Processor: 56800
• Core Size: 16-Bit
• Speed: 40MHz
• Connectivity: SCI, SPI
• Peripherals: POR, WDT
• Number Of I /o: 21
• Program Memory Size: 32KB (16K x 16)
• Program Memory Type: FLASH
• Ram Size: 4K x 16
• Voltage - Supply (vcc/vdd): 2.25 V ~ 3.6 V
• Data Converters: A/D 6x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 105°C
• Package / Case: 48-LQFP
• Data Bus Width: 16 bit
• Processor Series: MC56F81xx
• Core: 56800E
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 21
• Data Ram Size: 8 KB
• Operating Supply Voltage: - 0.3 V to + 4 V
• Maximum Operating Temperature: + 105 C
• Mounting Style: SMD/SMT
• Data Rom Size: 8 KB
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

5.4 Block Diagram
5.5 Operating Modes
The ITCN module design contains two major modes of operation:
56
•
•
Functional Mode
The ITCN is in this mode by default.
Wait and Stop Modes
During Wait and Stop modes, the system clocks and the 56800E core are turned off. The ITCN will signal
a pending IRQ to the System Integration Module (SIM) to restart the clocks and service the IRQ. An IRQ
can only wake up the core if the IRQ is enabled prior to entering the Wait or Stop mode. Also, the IRQA
signal automatically becomes low-level sensitive in these modes, even if the control register bits are set to
make them falling-edge sensitive. This is because there is no clock available to detect the falling edge.
A peripheral which requires a clock to generate interrupts will not be able to generate interrupts during Stop
mode. The FlexCAN module can wake the device from Stop mode, and a reset will do just that, or IRQA
and IRQB can wake it up.
INT1
INT82
Decode
Decode
Priority
Priority
Level
Level
2 -> 4
2 -> 4
Figure 5-1 Interrupt Controller Block Diagram
56F8322 Techncial Data, Rev. 16
Level 0
Level 3
Encoder
Encoder
Priority
Priority
82 -> 7
82 -> 7
7
7
any0
any3
IACK
SR[9:8]
CONTROL
PIC_EN
Freescale Semiconductor
INT
VAB
IPIC
Preliminary