ATSAM3S4CA-AU Atmel, ATSAM3S4CA-AU Datasheet - Page 813

• Manufacturer Part Number: ATSAM3S4CA-AU
• Description: IC MCU 32BIT 256KB FLASH 100LQFP
• Manufacturer: Atmel
• Series: SAM3Sr

Specifications of ATSAM3S4CA-AU

• Core Processor: ARM® Cortex-M3™
• Core Size: 32-Bit
• Speed: 64MHz
• Connectivity: EBI/EMI, I²C, MMC, SPI, SSC, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT
• Number Of I /o: 79
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 48K x 8
• Voltage - Supply (vcc/vdd): 1.62 V ~ 1.95 V
• Data Converters: A/D 16x10/12b, D/A 2x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-LQFP
• Controller Family/series: ATSAM3S
• No. Of I/o's: 79
• Ram Memory Size: 48KB
• Cpu Speed: 64MHz
• No. Of Timers: 6
• Rohs Compliant: Yes
• Processor Series: ATSAM3x
• Core: ARM Cortex M3
• 3rd Party Development Tools: JTRACE-CM3, MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: ATSAM3S-EK
• Cpu Family: AT91
• Device Core: ARM Cortex-M3
• Device Core Size: 32b
• Frequency (max): 64MHz
• Total Internal Ram Size: 48KB
• # I/os (max): 79
• Number Of Timers - General Purpose: 6
• Operating Supply Voltage (typ): 1.8/3.3V
• Operating Supply Voltage (max): 1.95/3.6V
• Operating Supply Voltage (min): 1.62V
• On-chip Adc: 16-chx12-bit
• On-chip Dac: 2-chx12-bit
• Instruction Set Architecture: RISC
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 100
• Package Type: LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

35.13 Write Protection Registers
6500C–ATARM–8-Feb-11
To prevent any single software error that may corrupt HSMCI behavior, the entire HSMCI
address space from address offset 0x000 to 0x00FC can be write-protected by setting the
WPEN bit in the
If a write access to anywhere in the HSMCI address space from address offset 0x000 to 0x00FC
is detected, then the WPVS flag in the HSMCI Write Protect Status Register (HSMCI_WPSR) is
set and the field WPVSRC indicates in which register the write access has been attempted.
The WPVS flag is reset by writing the HSMCI Write Protect Mode Register (HSMCI_WPMR)
with the appropriate access key, WPKEY.
The protected registers are:
•
•
•
•
•
•
“HSMCI Mode Register” on page 816
“HSMCI Data Timeout Register” on page 818
“HSMCI SDCard/SDIO Register” on page 819
“HSMCI Completion Signal Timeout Register” on page 825
“” on page 838
“HSMCI Configuration Register” on page 839
“HSMCI Write Protect Mode Register”
(HSMCI_WPMR).
SAM3S Preliminary
813