ATSAM3S4CA-AU Atmel, ATSAM3S4CA-AU Datasheet - Page 970

• Manufacturer Part Number: ATSAM3S4CA-AU
• Description: IC MCU 32BIT 256KB FLASH 100LQFP
• Manufacturer: Atmel
• Series: SAM3Sr

Specifications of ATSAM3S4CA-AU

• Core Processor: ARM® Cortex-M3™
• Core Size: 32-Bit
• Speed: 64MHz
• Connectivity: EBI/EMI, I²C, MMC, SPI, SSC, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT
• Number Of I /o: 79
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 48K x 8
• Voltage - Supply (vcc/vdd): 1.62 V ~ 1.95 V
• Data Converters: A/D 16x10/12b, D/A 2x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-LQFP
• Controller Family/series: ATSAM3S
• No. Of I/o's: 79
• Ram Memory Size: 48KB
• Cpu Speed: 64MHz
• No. Of Timers: 6
• Rohs Compliant: Yes
• Processor Series: ATSAM3x
• Core: ARM Cortex M3
• 3rd Party Development Tools: JTRACE-CM3, MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: ATSAM3S-EK
• Cpu Family: AT91
• Device Core: ARM Cortex-M3
• Device Core Size: 32b
• Frequency (max): 64MHz
• Total Internal Ram Size: 48KB
• # I/os (max): 79
• Number Of Timers - General Purpose: 6
• Operating Supply Voltage (typ): 1.8/3.3V
• Operating Supply Voltage (max): 1.95/3.6V
• Operating Supply Voltage (min): 1.62V
• On-chip Adc: 16-chx12-bit
• On-chip Dac: 2-chx12-bit
• Instruction Set Architecture: RISC
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 100
• Package Type: LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

• SELPLUS: SELection for PLUS comparator input
0..7 = selects the input to apply on analog comparator SELPLUS comparison input.
• ACEN: Analog Comparator ENable
0 (DIS) = Analog Comparator Disabled.
1 (EN) = Analog Comparator Enabled.
• EDGETYP: EDGE TYPe
• INV: INVert comparator output
0 (DIS) = Analog Comparator output is directly processed.
1 (EN) = Analog Comparator output is inverted prior to being processed.
• SELFS: SELection of Fault Source
0 (CF) = the CF flag is used to drive the FAULT output.
1 (OUTPUT) = the output of the Analog Comparator flag is used to drive the FAULT output.
• FE: Fault Enable
0 (DIS) = the FAULT output is tied to 0.
1 (EN) = the FAULT output is driven by the signal defined by SELFS.
970
Value
0
1
2
3
4
5
6
7
Value
0
1
2
SAM3S Preliminary
Name
RISING
FALLING
ANY
Name
AD0
AD1
AD2
AD3
AD4
AD5
AD6
AD7
Description
only rising edge of comparator output
falling edge of comparator output
any edge of comparator output
Description
Select AD0
Select AD1
Select AD2
Select AD3
Select AD4
Select AD5
Select AD6
Select AD7
6500C–ATARM–8-Feb-11