LPC4350FET256,551 NXP Semiconductors, LPC4350FET256,551 Datasheet - Page 15

• Manufacturer Part Number: LPC4350FET256,551
• Description: IC MCU 32BIT 256LBGA
• Manufacturer: NXP Semiconductors
• Series: LPC43xxr

Specifications of LPC4350FET256,551

• Core Processor: ARM® Cortex™-M4/M0
• Core Size: 32-Bit Dual-Core
• Speed: 150MHz
• Connectivity: CAN, EBI/EMI, Ethernet, I²C, Microwire, SD/MMC, SPI, SSI, SSP, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, I²S, LCD, Motor Control PWM, POR, PWM, WDT
• Number Of I /o: 146
• Program Memory Size: -
• Program Memory Type: ROMless
• Eeprom Size: -
• Ram Size: 264K x 8
• Voltage - Supply (vcc/vdd): 2.2 V ~ 3.6 V
• Data Converters: A/D 16x10b; D/A 1x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 256-LBGA
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

NXP Semiconductors
Table 3.
LCD, Ethernet, USB0, and USB1 functions are not available on all parts. See
LPC4350_30_20_10
Objective data sheet
Symbol
P1_19
P1_20
P2_0
Pin description
M11
M10
T16
x
x
x
…continued
K9
K10 100 70
G10 108 75
96
68
All information provided in this document is subject to legal disclaimers.
Rev. 2.1 — 23 September 2011
47
48
50
[3]
[3]
[3]
I; PU I
I; PU I/O GPIO0[15] — General purpose digital input/output
I; PU I/O SGPIO4 — General purpose digital input/output pin.
I/O SSP1_SCK — Serial clock for SSP1.
-
-
O
-
O
I/O I2S1_TX_SCK — Receive Clock. It is driven by the
I/O SSP1_SSEL — Slave Select for SSP1.
-
O
I
-
I/O SGPIO13 — General purpose digital input/output pin.
-
O
I/O EMC_A13 — External memory address line 13.
O
I/O GPIO5[0] — General purpose digital input/output pin.
-
I
O
Description
ENET_TX_CLK (ENET_REF_CLK) — Ethernet
Transmit Clock (MII interface) or Ethernet Reference
Clock (RMII interface).
R — Function reserved.
R — Function reserved.
CLKOUT — Clock output pin.
R — Function reserved.
I2S0_RX_MCLK — I2S receive master clock.
master and received by the slave. Corresponds to the
signal SCK in the I
pin.
R — Function reserved.
ENET_TXD1 — Ethernet transmit data 1 (RMII/MII
interface).
T0_CAP2 — Capture input 2 of timer 0.
R — Function reserved.
R — Function reserved.
U0_TXD — Transmitter output for USART0.
USB0_PWR_EN — VBUS drive signal (towards
external charge pump or power management unit);
indicates that Vbus must be driven (active high).
R — Function reserved.
T3_CAP0 — Capture input 0 of timer 3.
ENET_MDC — Ethernet MIIM clock.
32-bit ARM Cortex-M4/M0 microcontroller
Table
LPC4350/30/20/10
2.
2
S-bus specification.
© NXP B.V. 2011. All rights reserved.
15 of 145