S1D13704 Epson Electronics America, Inc., S1D13704 Datasheet - Page 163

• Manufacturer Part Number: S1D13704
• Description: LCD Controller
• Manufacturer: Epson Electronics America, Inc.

Epson Research and Development
Vancouver Design Center
Programming Notes and Examples
Issue Date: 01/02/12
**
**
*/
SET_REG(0x08, 0x1E);
/*
** Register 09h - FPFRAME Start Position - not used by STN
*/
SET_REG(0x09, 0x00);
/*
** Register 0Ah - Vertical Non-Display Register
**
**
*/
SET_REG(0x0A, 0x3B);
/*
** Register 0Bh - MOD Rate - not used by this panel
*/
SET_REG(0x0B, 0x00);
/*
** Register 0Ch - Screen 1 Start Word Address LSB
** Register 0Dh - Screen 1 Start Word Address MSB
**
*/
SET_REG(0x0C, 0x00);
SET_REG(0x0D, 0x00);
/*
** Register 0Fh - Screen 2 Start Word Address LSB
** Register 10h - Screen 2 Start Word Address MSB
**
*/
SET_REG(0x0F, 0x00);
SET_REG(0x10, 0x00);
/*
** Register 12h - Memory Address Offset
**
**
**
*/
SET_REG(0x12, 0x00);
/*
** Register 13h - Screen 1 Vertical Size LSB
** Register 14h - Screen 1 Vertical Size MSB
- CAlculated in conjunction with register 08h (HNDP) to
- Start address should be set to 0
- Set this start address to 0 too
- Used for setting memory to a width greater than the
Frame Rate = ---------------------------
achieve the desired frame rate.
display size. Usually set to 0 during initialization
and programmed to desired value later.
(HDP + HNDP) * (VDP + VNDP)
X26A-G-002-03
S1D13704
Page 67