S1D13704 Epson Electronics America, Inc., S1D13704 Datasheet - Page 264

• Manufacturer Part Number: S1D13704
• Description: LCD Controller
• Manufacturer: Epson Electronics America, Inc.

Page 8
S1D13704
X26A-E-006-01
8. Modify MODE0.H.
9. Edit the file PLATFORM.REG to match the screen resolution, color depth, and rota-
The file MODE0.H (located in x:\wince300\platform\cepc\drivers\display\S1D13704)
contains the register values required to set the screen resolution, color depth (bpp),
display type, display rotation, etc.
Before building the display driver, refer to the descriptions in the file MODE0.H for
the default settings of the display driver. If the default does not match the configura-
tion you are building for then MODE0.H will have to be regenerated with the correct
information.
Use the program 13704CFG to generate the header file. For information on how to use
13704CFG, refer to the 13704CFG Configuration Program User Manual, document
number X26A-B-001-xx, available at www.erd.epson.com
After selecting the desired configuration, export the file as a “C Header File for
S1D13704 WinCE Drivers”. Save the new configuration as MODE0.H in the
\wince300\platform\cepc\drivers\display, replacing the original configuration file.
tion information in MODE.H. PLATFORM.REG is located in x:\wince300\plat-
form\cepc\files.
For example, the display driver section of PLATFORM.REG should be as follows
when using a 320x240 LCD panel with a color depth of 8 bpp and a SwivelView
mode of 0° (landscape):
; Default for EPSON Display Driver
; 320x240 at 8 bits/pixel, LCD display, no rotation
; Useful Hex Values
; 1024=0x400, 768=0x300 640=0x280 480=0x1E0 320=140 240=0xF0
[HKEY_LOCAL_MACHINE\Drivers\Display\S1D13704]
“Width”=dword:140
“Height”=dword:F0
“Bpp”=dword:8
“ActiveDisp”=dword:1
“Rotation”=dword:0
ENDIF
ENDIF
ENDIF
ENDIF
ENDIF
ENDIF
ENDIF
ddi.dll $(_FLATRELEASEDIR)\ddi_flat.dll
;Insert this line
Epson Research and Development
Windows® CE 3.x Display Drivers
NK SH
Vancouver Design Center
Issue Date: 01/05/24