at85c51snd3 ATMEL Corporation, at85c51snd3 Datasheet - Page 235

• Manufacturer Part Number: at85c51snd3
• Description: At85c51snd3 Single-chip Digital Audio Decoder - Encoder With Usb 2.0 Interface
• Manufacturer: ATMEL Corporation

Access Cycles
Timings Configuration
Address Set-Up and Hold Time
Access Width Time
7632D–MP3–01/07
The AT85C51SND3B enables connection of LCD controller with normalized 6800 and
8080 interface as shown in Figure 127 and Figure 128, but also enables connection of
LCD controller with non normalized 6800 and 8080 interface as shown in Figure 129
and Figure 130.
This is achieved by setting or clearing CYCT bit in LCDCON1 for selecting non normal-
ized or normalized access type.
Figure 127. 6800 Normalized Type Access Cycle
Figure 128. 8080 Normalized Type Access Cycle
Figure 129. 6800 Special Type Access Cycle
Figure 130. 8080 Special Type Access Cycle
As detailed in Figure 131, access cycle timing can be configured to comply with the LCD
controller specification. These timing parameters are:
•
•
•
•
The address set-up and hold time can be programmed by ADSUH1:0 bits in LCDCON0
from 1 oscillator clock period up to 4 oscillator clock periods. These timing are not disso-
ciated and must be programmed to the highest time value of the set-up and hold time
parameters.
The access width time can be programmed by ACCW3:0 bits in LCDCON0 from 1 oscil-
lator clock period up to 16 oscillator clock period.
Address set-up time
Access width time
Address hold time
Sleep Wait time
CS, RD, WR
CS, RW, RS
E, RW, RS
RD, WR
CS, A0
CS
A0
E
ADSUH
ADSUH
ADSUH
ADSUH
ACCW
ACCW
ACCW
ACCW
ADSUH
ADSUH
ADSUH
ADSUH
235